Search results

  1. Savageftr

    1983 K20 - Pep her up or leave her alone??

    What I would do... rebuild the engine how ever you like to make some power but put it back together and paint it so it looks completely stock. If it looks stock who is gonna know unless they rip the engine out and measure the cam lobes....
  2. Savageftr

    What is the best oil to run in 1984 C10 with high-milage stock 305?

    For your flat tappet cam you need zinc in the oil. I'm using conventional 10w30 (nothing special) then I add a zinc additive. I'm using 1/2 a bottle of Lucas Oil TB ZINC-PLUS per oil change. Half a bottle is what they recommend and that gets your zinc level way higher than any of the diesel or...
  3. Savageftr

    Header/Exhaust thoughts

    I put those summit ceramic coated headers and a flowmaster american thunder 2.5in dual exhaust kit on my 355. It's does sound good but I can't speak to the longevity of the headers, only been 6 months. Everything fit nice didn't have to fight with them. The header to head bolts just barley fit...
  4. Savageftr

    Timing on GM GoodWrench Crate Engine?

    If the vacuum advance is on manifold vacuum it advances the timing at idle. You will need to disconnect and cap it off to check base timing.
  5. Savageftr

    Factory leather steering wheel

    that's just a cheap gas station add on. throw it away and get a new one.
  6. Savageftr

    Coolant temp issues...

    I hear what your saying but when your gauge has temperatures on it you would think they should be close. Mine is metric so it's got 40(cold) 100(12 oclock) and 125(hot). It usually runs just over the 40 mark which is just wrong. operating temp should be around 80C to 90C. under heavy trailer...
  7. Savageftr

    Factory leather steering wheel

    I found another example of a Wrangler with the factory leather steering wheel. This one is a 86 Wrangler Calgary Stampede Edition. Looks like a cool truck. I've never seen one of theses in person but I doubt they made too many. Its got the horses in the decal instead of the W and a Calgary...
  8. Savageftr

    Ring and pinion swap

    Probably too far to ship to be worth it but thanks anyway. I'm near Winnipeg, Canada.
  9. Savageftr

    Scottsdale Wrangler

    My truck is original except for the rear bumper was originally painted. This a a chrome LMC rear step bumper. I have also replaced the 305 with a 350 but kept it very stock looking. Just cleaned up a few vacuum lines and stuff. All the badges are Wrangler badges. I don't have a close up picture...
  10. Savageftr

    Scottsdale Wrangler

    I have a 86 Wrangler Package B. I'm pretty sure that must be a replacement dash. Scottsdale is an mid level option package. Wranglers aren't particularly rare in Canada but they are Canadian only trucks. So that being said they would be very rare compared to more common US models.
  11. Savageftr

    Ring and pinion swap

    It would be nice but I'm not racing it or driving in the mud so the only use for it would be the occasional burn out... I figure less traction = less breaking shit I have lots of other shit I could spend $700 on right now that I actually need
  12. Savageftr

    Ring and pinion swap

    It would be nice but I'm not racing it or driving in the mud so the only use for it would be the occasional burn out... I figure less traction = less breaking shit I have lots of other shit I could spend $700 on right now that I actually need
  13. Savageftr

    Ring and pinion swap

    The TH350 is factory not swapped. Its the MX1 rop code for a TH350C with the converter lockup. I'm happy driving 55 or 60 on the highway. The only longer trips I will be taking will be pulling the camper. I want to be able to drive 55 ish on windy days and not smoke the trans. Right now when...
  14. Savageftr

    Coolant temp issues...

    My engine is not a computer controlled carb. I never had cats or the throttle position sensor. These carbs do have a dual capacity accelerator pump but if you unplug it, it just defaults to normal operation. This is a Canadian truck and we had a lot less emission controls than you guys had down...
  15. Savageftr

    Ring and pinion swap

    My buddy actually has a 14 bolt full floater I can have for next to nothing but I want to keep my stock rally wheels. I thought a ring and pinion swap would be the cheapest. about $250 plus/minus. The semi floating 14 bolts are hard to find I've heard and not cheap either.
  16. Savageftr

    Coolant temp issues...

    I got 2 different sensors from Rockauto. The first one had a resistance of about 600ohms and the second about 5k ohms. The 5k ohm one matches what I had in there from the factory. The sensor I changed out actually wasn't the issue at all. The 600 ohm sensor reads too hot and then 5k ohms sensor...
  17. Savageftr

    Ring and pinion swap

    I have an 86 c15 with 3. 08 gears and a th350. I'm pulling a camper with the truck and it seems a bit too steep for this. Any issues just buying a 3.73 ring and pinion set? I should just need a new crush washer and set the depth, lash and pinion bearing preload again right? I'm plan on just...
  18. Savageftr

    Coolant temp issues...

    Anyone have issues with their temp gauge reading lower than it should? I replaced the sending unit but it still reads less than half what it should be at operating temp. I have confirmed it's warming up properly. It's like there is high resistance at one of the connections between the gauge...
  19. Savageftr

    Spare tire mount under the bed with trailer hitch?

    ya, I could see that thing being a pain in the ass but I just didn't like look of the in bed mount. Maybe I'll just leave it in my garage unless im going on a longer trip. I'll can just throw it in the bed just in case when I go camping. Realistically I'm crippled anyway and changing the spare...
  20. Savageftr

    Carbureted 305 to 350 with swap with knock sensor

    Thanks good to know. I see people (on you tube) talking about deleting the knock sensor circuit going to the ICM or swapping for a 4 pin ICM but I think if I have a working knock sensor I should be able to run at optimum advance and not have to worry about detonation issues. It's just hard to...
  21. Savageftr

    Spare tire mount under the bed with trailer hitch?

    sorry not looking to trade. I want to keep it since it's original to the truck. Just trying to figure out what will fit.
  22. Savageftr

    Carbureted 305 to 350 with swap with knock sensor

    Hi there, looking for an engine guy that might have some experience with this. I just swapped out my stock 1986 305 for a 300hp ish 350. Engine is: 74 block .030 over Sealed power .125 domed pistons 882 heads ported to match edlebrock performer intake Melling 22200 cam "327 - 350hp" copy...
  23. Savageftr

    Spare tire mount under the bed with trailer hitch?

    I'm looking for a spare tire mount for under the bed that will work with my trailer hitch. I currently have the factory side mount spare tire carrier in the bed but I'd like to relocate it. Will a factory one work? Where to buy one LMC?
  24. Savageftr

    Tires on stock Rally Wheels?

    What size tires are people running on stock rallys? I was thinking 275/60R15 Radial T/As on the rear and either the same on the front if they wont rub or narrower but the same overall diameter.
  25. Savageftr

    What did you replace factory radio with?

    AC Delco is best. Try to find another factory radio

Latest posts

Forum statistics

Threads
44,416
Posts
957,123
Members
36,753
Latest member
TheRigLivesOn
Top