Search results

  1. DBarre

    Double Rear Sliding Window Latch 1974 K20

    Try this thread: https://www.gmsquarebody.com/threads/sliding-window-latch.25852/
  2. DBarre

    Brand New A/C Compressor Clutch Slipping

    Thank y'all for the advice! I got it charged and cooling now. In approximately 85 degree ambient, the pressures were 55 psi and 255 psi with about 3 cans of 134a. In the end I ended up replacing every component in the system: New condenser, orifice, drier, compressor, oil, 134a, and belt...
  3. DBarre

    Sliding window latch

    I replaced my latch with the DVL2 metal one and I've been happy with it so far. It fit perfectly on my '81.
  4. DBarre

    Advice on rebuilding control arms

    It depends on if you want to spend more time or money. I don't think there's anything wrong with doing it either way. I'm planning on rebuilding the control arms on my C10 soon with some poly bushings. You should be able to do it if you have the time and patience.
  5. DBarre

    Advice on rebuilding control arms

    I've been watching EricTheCarGuy on Youtube and recently he did a series of videos replacing the suspension on a GMT400 ('88-'98) Chevy. He really goes into detail and explains things well. There are some differences between the older and newer trucks, but the basics are the same. If you're...
  6. DBarre

    Brand New A/C Compressor Clutch Slipping

    There was a bunch of crap in the orifice when I replaced it. I'm sure that's not good. I did install it in the correct direction (just double checked a video). When charging, the low pressure was around 30 psi and the high was approaching 300 psi. The high was too high and low was still low for...
  7. DBarre

    Help upgrading the AC on a 1985 C20 6.2L

    Sounds like it would be the A6. It might be good to look into the Sanden upgrade. Check the A/C section of the forum for the thread.
  8. DBarre

    No availability for 1/2 ton lower arms?

    It looks like LMC has them but they don't look cheap.
  9. DBarre

    Help upgrading the AC on a 1985 C20 6.2L

    Does the compressor look similar to this? If so, it's an R4 compressor. I purchased this one for my '81: https://www.rockauto.com/en/moreinfo.php?pk=816244&jsn=__GIP__3__
  10. DBarre

    Brand New A/C Compressor Clutch Slipping

    Well, now that's it's hot again I got back to working on the a/c. I put another new compressor on it and had the same problem. Guess what? Snoots called it. The belt was slipping! I feel dumb now. I still haven't got it blowing cold. When I add it all up, I've already spent at least a full...
  11. DBarre

    Bed Stake Pocket Anchor

    I used a pair of these for a couple of years before I found a headache rack. They worked well. https://www.bullringusa.com/product/retractable-tie-downs-bull-ring/
  12. DBarre

    AC Vent Question

    IIRC, the chrome vent has felt washers where it pivots. Those should take up the space and keep it from just flopping down. I'm sure someone else may be able to provide pictures if needed. Edit: You're in luck! I found an existing thread...
  13. DBarre

    Wanted - 18"x 8" Wheels

    A buddy of mine is looking for some wheels for his '79 Jeep full size Cherokee. It shares the bolt pattern with the K10s of 6 on 5.5". He upgraded the tires on his daily and wants to get some 18"x 8" wheels to fit the old full size Jeep. Anybody have a set they would be willing to part with...
  14. DBarre

    What have you done to your square lately??

    I made some custom valve stem caps out of .38 special empties I shot the other day.
  15. DBarre

    Body swap

    I did something similar with a 2WD hump from a '79 in my '81: 81 C10 Six Banger
  16. DBarre

    Body swap

    As far as I know, it should bolt up once you take care of the floor. The front frame horns are different, so the bumper won't just bolt up.
  17. DBarre

    Clutch Zbar Stud

    It goes on the bellhousing on my '81 3 speed.
  18. DBarre

    1974 C10 brake proportioning valve wiring *Pictures requested*

    Assuming it's the same as an '81, the brake warning light doesn't light up. I unplugged mine to pass inspection. I need to replace my proportioning valve.
  19. DBarre

    73/78 c10

    The battery tray is completely different, but you can do anything if you put your mind to it!
  20. DBarre

    How big of a job is this?

    As far as I know, no one makes replacement panels for under the seat area. That cab must have sat outside with no doors for a while to get that bad. You'll probably need floorpans, outer rockers and inner rockers for both sides. Possibly cab supports, but they may still be good. And a lot of...
  21. DBarre

    1984 C10 Common Problems? What to look for

    If it drives well, just check all the fluids and make sure they're all topped off and in good condition. Rust is my number one thing to look for. Take a magnet to the cab corners, rockers and wheel wells. There could be bondo hiding some bad rust underneath. After that, price is the kicker...
  22. DBarre

    1979 K25 with gauges - Indicator Lights

    It should be 4wd and choke under the speedo. Choke only lights up when it isn't working properly, so I've read.
  23. DBarre

    Bvllsh!t on craigslist.

    This one's too far from me: https://sanantonio.craigslist.org/cto/d/waco-1979-chevrolet-pickup/6818373210.html
  24. DBarre

    Canyon Copper?

    I'm taking a bit of a guess, but it could be a different name for "russet". My grandpa's '78 was that color from the factory. I found this website and it seems to have most of the color codes. Here's the page for the '86 Chevy Trucks...
  25. DBarre

    Anyone seen these?

    I like it! If you decide to get rid of it, I'm sure someone on here would love to have it.

Latest posts

Forum statistics

Threads
44,409
Posts
956,879
Members
36,727
Latest member
jmcbil24
Top