Search results
-
20" wheel tire size
I'm running 245 45 20 on front and 275 45 20 rear- Jarhead79
- Post #2
- Forum: Wheels and Tires
-
Right rear locking up long before other brakes applied..
My 92 locked up randomly after hitting bumps, replace the adjusters, mine were bad and after driving they expand out and when is hit a bump its lock up! -
Aftermarket door shells
I may just take a grinder to the passenger edge and take about a 1/8 to 1/4 inch off and have to grind the lower hinge portion on drivers side to get it to scoot left a little! I noticed the tailgate stops on that little cup and won't let it slide over more. If that makes sense!- Jarhead79
- Post #5
- Forum: Paint and Body
-
Aftermarket door shells
Yeah I got a new tailgate that I'm gonna have to work on, passenger side sits almost flush with bedside and drivers side sits too far away from the bedside but the body lines are super close!- Jarhead79
- Post #3
- Forum: Paint and Body
-
Aftermarket door shells
So has anyone dealt with replacing their doors with aftermarket ones. I know oem are better but I'm wondering about fitment! I have one drivers door that is salvageable but the passenger inside has been hacked on an hit on outside, pulled and filled and has quite a bit of bondo on it, I'm...- Jarhead79
- Thread
- Replies: 4
- Forum: Paint and Body
-
Tailgate handle issues!
Got mine apart and the new gate on! Just needs some slight modification or grinding for better fitment. -
Flowmasters 40 knockoffs
Yeah, they're not exactly what I wanted, the guy that did the work didn't do what I asked him to do, first put wrong mufflers on it then wrong pipe, gonna redo it eventually!- Jarhead79
- Post #5
- Forum: Tech Discussion
-
Tailgate handle issues!
Sounds like your linkage rods have stretched out or are disconnected. -
Flowmasters 40 knockoffs
I'm using them but are three inch but this should give you a little idea of the sound. http://youtu.be/CXg4Irke8R8- Jarhead79
- Post #2
- Forum: Tech Discussion
-
Tailgate handle issues!
Bought a brand new tailgate and wanted to install it, bolts for the handle were frozen solid, so bought an impact tool and got two of the three out fully but the last one is about half way out but now spins freely! So I'm thinking the part where the screw goes through the handle has broken... -
Noisy loud tailgate hinges!
Anyone besides me hate hearing the tailgate rattle and the metal hinges slapping back and forth? Lol I sort of fixed it with some vinyl fabric and made some sleeves to see if I could hush them up a bit, it works but I'd rather figure out a way to use the newer style cable setup on it. Anyone... -
Tubular control arms
Anyone running with the lowered tubular control arms and upper tubular arms? I'm thinking of going this route instead of using the stock stuff. Any pros and cons that you can give me will be appreciated!- Jarhead79
- Thread
- Replies: 18
- Forum: Lowered & Street Systems
-
Rear disc brakes on the cheap
That master cylinder looks like what I already have on my truck, I'm almost ready to try this! -
Rear disc brakes on the cheap
Still wondering if the oem master cylinder and stock brake lines work or do you have to change to different rear brake lines -
Boredom mod on lower door panels
The door panels I took off and cleaned then sprayed them with black plastidip, couldn't decide on if I wanted grey or black interior, so I did black first, it's held up really well for temporary, will most likely peel the panels and then sand and paint them permanent. Dash turned out really well... -
Boredom mod on lower door panels
Could you get some more pics, I'm not sure exactly what too look for in the pics other than the aluminum plating towards the top of the door. -
Boredom mod on lower door panels
I'm still leaning towards making some metal ones. I have an idea but have to have them cut out but can't do that until I make a pattern for them. -
Boredom mod on lower door panels
Horrible pic, look away! Lol this along with the dash, carpet, seat, interior trim pieces and headliner were all a different kind of red and none of them looked nice. Still going to redo the door panels and paint the trim and do the headliner! So much to do so little time and cash! Lmao -
-
-
Boredom mod on lower door panels
Here is my $4.00 late night lower door panel mod! Everything in the truck was a different shade of red so I started blackening things out! Lol I'm going to redo them later but for now here's my quick fix! First pic nasty burgundy Second pic originally on door Third pic quick fix! -
Rag joint replacement
I'm not entirely sure it'll swap into my column, my column is from an s10 and I'm not sure if it's the same as a fullsize, plus no torch or benzo torch, and no local junkyards that have a jeep shaft. Lol- Jarhead79
- Post #5
- Forum: Suspension, Steering & Brakes
-
Rag joint replacement
I don't have the option to replace the steering shaft with one from a jeep Cherokee, I'd be happy with just the rag joint replacement, at my part time job at Oreilys we have Dorman replacement pads. Ive never changed these so is it really easy or do I just deal with loose steering? Lol- Jarhead79
- Thread
- Replies: 7
- Forum: Suspension, Steering & Brakes
-
Gauge cluster
Sorry I didn't see this until now, I ended up trading the speedo for a new rear sliding glass. -
Passenger lower control arm
If I can't do it this pay period hold onto them for a couple weeks, I had some expenses this week that are unavoidable, but I'll take em, would really make changing them out easier!
