Search results

  1. kalger

    TH350 Removal

    Thanks everyone. I found the bolts and was able to remove them without too much difficulty once they were found. I'm very much looking forward to getting everything cleaned and degreased before putting everything back together. Thanks again!
  2. kalger

    TH350 Removal

    AMAZING! Thanks all.
  3. kalger

    TH350 Removal

    I'm attempting to get my TH350 transmission out of my 1975 GMC C1500 with a 350 sbc. I can find two bolts that connect the transmission to the engine block. How many should I be looking for and any tips or tricks to a) find/see/feel the other ones, and b) get them out? Add to the "fun" that the...
  4. kalger

    Engine Rebuild Kit Recommendations

    Thanks all for the comments and suggestions. I will reach out to a local engine shop and see the price for all of the machine work. I might just go with an engine replacement to save some headaches.
  5. kalger

    Engine Rebuild Kit Recommendations

    I'm looking for a recommendation for an engine rebuild kit for my 1975 GMC 1/2 ton PU with the 5.7 350 engine. Any information would be very much appreciated. Thanks.
  6. kalger

    New guy here, Thanks for having me

    Welcome!
  7. kalger

    Old, retired guy new to this group.

    Welcome!
  8. kalger

    First Time Square Body Owner

    Welcome from Oregon. Nice looking truck. They are a lot of fun!
  9. kalger

    New to the forum with alot of questions.

    Thank you for your service and welcome to the forum.
  10. kalger

    New Member Here

    @Mr Clean, thanks for that. That's the direction I think I'm going to head, but it's good to hear that it's an "easy fix." Any recommendations on a 110 Welder? (Flame wars start now, I suppose.)
  11. kalger

    New Member Here

    Driver's rear panel Driver's front fender Passenger side door Passenger side rear panel Here's the rest of the visible rusted-out spots, @Grit dog. Overall not horrible, but still needs some attention. Not sure if that front fender is worth saving with a patch or just replacing it all.
  12. kalger

    New Member Here

    @Grit dog All of the documentation I have and the VIN indicate it's a 1/2 ton. That's what I'm leaning toward for the bed. I'll need to start searching for a replacement and either learn how to weld or find someone local to do that work. If you have any leads for a replacement bed here in the...
  13. kalger

    Replaced gaskets, now it won't start

    Thanks all. Most importantly, as of the moment anyway, no more fluid leaks!
  14. kalger

    Replaced gaskets, now it won't start

    In an effort to make myself not sound like a complete, well, doof, I'll explain my process. :D As this was my first real endeavor into a project like this I was pretty focused on keeping everything organized. Nuts/bolts got put into their own container that was labeled. Pictures were taken of...
  15. kalger

    Help with timing mark

    Texas Mike; The widest saw tooth (right side of that picture) has a 0 on the side closest to the engine. From left to right the numbers are 12, 8, 4, and 0. It would appear that the 4, 8, and 12 are referencing the peak/valleys away from the engine.
  16. kalger

    Replaced gaskets, now it won't start

    It's amazing what happens when one reconnects ALL of the wires. Now to troubleshoot some gauge issues. I'm learning that with classic vehicles, the learning never ends. :D
  17. kalger

    Replaced gaskets, now it won't start

    About a month ago I started the process of going through and replacing gaskets/filters in my 1975 GMC C1500 (350 engine). I finally got it put back together today, put fluids in, and reconnected the battery. When I went to start it up, nothing. The interior light didn't come on, the dash didn't...
  18. kalger

    Oil Pan Gasket Change Out... what else?

    Thanks, all. A big of weight relief, a breaker bar, some bumped knuckles, a few choice words, and they're out.
  19. kalger

    Oil Pan Gasket Change Out... what else?

    Thanks, Snoots. I'll take a look.
  20. kalger

    Oil Pan Gasket Change Out... what else?

    Big hands... small spaces. Additionally, just the age of everything is, I'm guessing, making the process of loosening the nuts a bit more challenging.
  21. kalger

    Oil Pan Gasket Change Out... what else?

    Not an insignificant oil leak(s). Now that I'm as far into it as I am, I'm also planning on replacing the water pump. I am battling with the engine mount bolts—any tips/tricks there would be great. ;) But yes, the "Might as well" factor is high... and increasing, as is the variety of tools in...
  22. kalger

    Oil Pan Gasket Change Out... what else?

    Gotcha. Thanks.
  23. kalger

    Oil Pan Gasket Change Out... what else?

    Sorry, still fairly new to the whole auto mechanic bit. Drive connector???
  24. kalger

    Oil Pan Gasket Change Out... what else?

    I'm getting ready to change out the oil pan gasket (5.7L 350) on my 1975 GMC C1500. I'm looking for any tips/tricks to make the process easier and also suggestions on other things to do at the same time. Thinking engine mounts, TH350 filter, and gasket change. What else should I look at doing...
  25. kalger

    New Member Here

    Without a 100% exploration of rust into the front panel, it looks to be in decent shape. The bed itself is the largest concern and one that I don't have any experience attacking.

Latest posts

Forum statistics

Threads
44,168
Posts
950,801
Members
36,285
Latest member
ejulio
Top