Another leaf spring question: (plastic shims).

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
141
Reaction score
100
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
I posted a question a while back about these plastic shims but that was before I took my springs apart. Now I see there is a hole on each end of one of the leafs that had a plastic shim that snapped in place. The pass side had the little plastic nub broke off so the shim scooted away from the end, there is wear on the spring from them rubbing together. The drivers side doesn't have the wear since the plastic shim is still attached. This is on a 78 C10 Scottsdale that has never been took apart before, I've known the truck since new. Any ideas on where to get new shims like these? I've looked at LMC and every other place I know and found nothing. Without the nub they won't stay in place. May be fine without them but there is a little wear where the shim slipped off.
 

Attachments

  • spring 1.jpg
    spring 1.jpg
    125.3 KB · Views: 11
  • spring 2.jpg
    spring 2.jpg
    117.6 KB · Views: 10
  • spring 3.jpg
    spring 3.jpg
    107.6 KB · Views: 10
  • spring 4.jpg
    spring 4.jpg
    96.6 KB · Views: 9

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
141
Reaction score
100
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
Well, I dug around more and found a site "General Spring". Search "leaf springs", then "leaf spring parts", then "tip inserts". They have round, square, and rectangle shims. They have one that looks exactly like mine with the same oval hole. A few other sites have them also but they are hard to find since you have to search specific names such as Button Slider, Leaf Spring Tip Insert, Squeak Pads.
 

cadillac_al

Junior Member
Joined
Feb 7, 2025
Posts
11
Reaction score
14
Location
Maine
First Name
Alan
Truck Year
1976
Truck Model
K20
Engine Size
350
Great tip. I have had those fall out before and never knew where to get replacements. Same with the clamps. I'll bet General Spring has the clamps too.
 

Latest posts

Forum statistics

Threads
45,080
Posts
974,864
Members
38,020
Latest member
chevelless07
Top