Homemade and modified tool thread
- Thread starter Ricko1966
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,410
- Reaction score
- 3,465
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
I had one of those bike carriers what a pos! My 80 year old neighbor now uses it to drag his trash cans out to the pickup spot with his side by side!
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
Here are a couple.
Hillbilly hones
"Spanner" socket for a nut on the motor on the Oliver wood lathe
Heat shrunk extension for a countersink. Made it to chamfer the lifter bores on my slant six.
These two are more techniques or tips I guess.
Using press to hold carrier to tighten ring gear bolts
Running a bead of weld on a bearing race to shrink it to remove from a bore.
Hillbilly hones
You must be registered for see images attach
"Spanner" socket for a nut on the motor on the Oliver wood lathe
You must be registered for see images attach
Heat shrunk extension for a countersink. Made it to chamfer the lifter bores on my slant six.
You must be registered for see images attach
These two are more techniques or tips I guess.
Using press to hold carrier to tighten ring gear bolts
You must be registered for see images attach
Running a bead of weld on a bearing race to shrink it to remove from a bore.
You must be registered for see images attach
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
Axle seal install rig for my Dodge Dana 60 front
Axle tube scraper
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Axle tube scraper
You must be registered for see images attach
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
Cab lifting beam for use with cherry picker
Cardboard laid out to mark mandrel bends to cut them correctly. Also 3d printed mandrel bends mockup pieces.
Tig filler rack
Low profile tap extensions.
You must be registered for see images attach
You must be registered for see images attach
Cardboard laid out to mark mandrel bends to cut them correctly. Also 3d printed mandrel bends mockup pieces.
You must be registered for see images attach
Tig filler rack
You must be registered for see images attach
Low profile tap extensions.
You must be registered for see images attach
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
Pinion setting tool. I only had my time I to making it, I'd honestly recommend just getting pinion depth set by trying shims and reading the pattern with setup bearings.
Especially we with how much the commercial ones cost.
Especially we with how much the commercial ones cost.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
- Joined
- Dec 7, 2010
- Posts
- 24,810
- Reaction score
- 6,744
- Location
- Southeast PA
- First Name
- Paw Paw
- Truck Year
- 2007
- Truck Model
- Chevrolet Tahoe LT
- Engine Size
- 5.3, 4WD
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
In my Dart, 71 225/auto
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
- Joined
- Dec 7, 2010
- Posts
- 24,810
- Reaction score
- 6,744
- Location
- Southeast PA
- First Name
- Paw Paw
- Truck Year
- 2007
- Truck Model
- Chevrolet Tahoe LT
- Engine Size
- 5.3, 4WD
Love it! Is that a Clifford intake and headers?
- Joined
- Oct 27, 2016
- Posts
- 2,622
- Reaction score
- 6,922
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
Thank you.
It is an older Clifford 4 barrel manifold, Aussie cast Dutra Dual split manifolds, Quick fuel 450 carburetor, JP performance true double roller timing chain, Oregon Cam Grinders custom ground cam, .100 machined off the cylinder head for a little compression, 5 angle valve job. The valve cover is a low production cast piece from Argentina. Later electronic distributor triggering an HEI module and vortec coil.
- Joined
- Dec 7, 2010
- Posts
- 24,810
- Reaction score
- 6,744
- Location
- Southeast PA
- First Name
- Paw Paw
- Truck Year
- 2007
- Truck Model
- Chevrolet Tahoe LT
- Engine Size
- 5.3, 4WD
Very impressive! Thanks for sharing. I got a special place in my heart for these motors. Had several.
Similar threads
