Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The gap seems fine right around the door. I couldn't get it right on the fender first so I took it off, now I can't get right around the pillar
I've had to make the holes bigger and really push the fender ahead. The hood fits excellent. Just this door don't want to cooperate. I had an old door on previous while I was painting these and it fit fine. This is a new aftermarket
Well, you know the door is the problem then. If in an area where it can be bent I would try that. They actually bend fairly easy.
I did happen to drop this door while getting it ready for paint. I don't suppose and drop liek that could have bent it?
I actually got out of the truck after my last reply and just gave it a good jolt. It's not exactly perfect. But a whole lot better. Had no idea they were that easy to bend. Thanks for that
Good that it worked. On a friends K5 the aftermarket door was so off that we had to cut the window frame and weld it back on to make it fit.
