2 post shop lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

D

DRW65

Junior Member
Joined
Mar 20, 2023
Posts
8
Reaction score
27
Location
75707
First Name
Dan
Truck Year
1986
Truck Model
K1500
Engine Size
350
I have a two post 10,000# Challenger lift in my shop, I have no regrets. Benefit of a two post is the ability to do wheel end maintenance easily. I have had my Son's 2500HD 4x4 diesel crewcab on the lift, but never at fully raised position, and used underlift stands for safety. An overlooked maintenance item on surface mount lifts is monitoring the concrete anchor torque, check it monthly, or at least every 60 days.
 
K

KamperBob

Junior Member
Joined
Mar 16, 2024
Posts
23
Reaction score
24
Location
Somewhere USA
First Name
Robert
Truck Year
1984
Truck Model
k30
Engine Size
6.2
Walstw01 said:
I'd go with this ... if I had a place to put it ...

Wildfire XLT | wildfire-lifts

www.wildfirelifts.com www.wildfirelifts.com
Click to expand...
I'm thinking about a 4-post lift for a storage unit so free standing is a MUST. Even if I could bolt a 2-post lift to the floor, many have overhead sync hardware. A friend has a 2-post lift with open tops and ramp plates before/after the chain box across the floor between the uprights. I sure was grateful to use it for my 84 K30 build. I agree that 2-post seems more useful for most maintenance work. YMMV
 
Craig Nedrow

Craig Nedrow

NADAR UNDER THE RADAR
Supporting Member
Joined
Sep 1, 2018
Posts
1,036
Reaction score
2,184
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
few more lift pics, yeah I have an excellent shop, and use it almost every day. Just finished fixing my Howard rotovator with the lathe, and fixed a set of heavy duty front mount forks that were skid steer to the much better John Deere global system.
 

Attachments

  • IMG_3274~photo.JPG
    IMG_3274~photo.JPG
    151.2 KB · Views: 21
  • IMG_3275~photo.JPG
    IMG_3275~photo.JPG
    200.7 KB · Views: 20
  • IMG_3081~photo.JPG
    IMG_3081~photo.JPG
    124.7 KB · Views: 22
  • IMG_3085~photo.JPG
    IMG_3085~photo.JPG
    141.9 KB · Views: 22
  • IMG_3086~photo.JPG
    IMG_3086~photo.JPG
    141.3 KB · Views: 23
Craig Nedrow

Craig Nedrow

NADAR UNDER THE RADAR
Supporting Member
Joined
Sep 1, 2018
Posts
1,036
Reaction score
2,184
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
WFarm said:
@Craig Nedrow what booklet are you referring to for lift points? My factory service manuals show the lift points for my vehicles but just have to do what seems right for others.
Click to expand...
Bend pak has a book that shows the lift points for almost everything made, came with the lift. On my C20 page, you can see the lift points I use, very solid. Every time I see your picture with your pup, makes me smile, love dogs. Scratch that tummy Paul!
 

Attachments

  • IMG_3272~photo.JPG
    IMG_3272~photo.JPG
    149.8 KB · Views: 22
  • IMG_3273~photo.JPG
    IMG_3273~photo.JPG
    135.6 KB · Views: 19
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Craig Nedrow said:
Curtis air compressor with hose reels for air. I gotta get up there and pack the front wheel bearings on the C20!!
Click to expand...
I'm definitely upgrading my compressor when I can. I have an old speed air 30 gallon. Tank is decent size but pump is slow to recover. I picked up this old pump to try out. It's allot bigger. Going to need to figure out how many hp.
 

Attachments

  • 20241001_100745.jpg
    20241001_100745.jpg
    157.3 KB · Views: 17
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Craig Nedrow said:
Bend pak has a book that shows the lift points for almost everything made, came with the lift. On my C20 page, you can see the lift points I use, very solid. Every time I see your picture with your pup, makes me smile, love dogs. Scratch that tummy Paul!
Click to expand...
Got a number on that book? I'll try to find it and order one. Probably be a life saver lol
 
Normmus

Normmus

Member
Joined
Dec 20, 2022
Posts
48
Reaction score
133
Location
Saskatchewan
First Name
Norm
Truck Year
1977
Truck Model
K10
Engine Size
350
WFarm said:
@Craig Nedrow what booklet are you referring to for lift points? My factory service manuals show the lift points for my vehicles but just have to do what seems right for others.
Click to expand...
There's a booklet published by Automotive Lift Institute that you can get from lift suppliers that show the lift points of all the makes and models
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
doing some clearing, Removed 6 stumps today. Some were small. Mostly oak and 2 fir. Son learning how to use the mini X
Think I should start a different thread for the rest of project? Or just leave it all here?
 

Attachments

  • 20241009_161832.jpg
    20241009_161832.jpg
    304.1 KB · Views: 18
  • 20241009_174608.jpg
    20241009_174608.jpg
    198.2 KB · Views: 22
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
It's officially ordered. Had to pre-order, Due to arrive in there warehouse before the 1st then it will ship out to me shortly after. So stoked, someone wake me up, I must be dreaming lol
Been a 25 year long dream
 
You must log in or register to reply here.

Similar threads

hey mister
Pre & Post Thermal Exchanger swap
Replies
4
Views
425
hey mister
hey mister
M
'87 GMC Suburban V1500 1/2 ton - replacing leaf springs
Replies
0
Views
592
MrDSmith
M
S
Most complete lift kit
Replies
2
Views
1K
Silver Square
S
Onelinez
Front end lifts when turning
Replies
3
Views
959
Onelinez
Onelinez
B
2 or 4 inch lift kit
2
Replies
19
Views
7K
Frankenchevy
Frankenchevy

Latest posts

Forum statistics

Threads
44,162
Posts
950,645
Members
36,276
Latest member
2manysquares2care
Top