3 on the tree to sm465 conversion questions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

J

Jamesz

Junior Member
Joined
Sep 12, 2024
Posts
25
Reaction score
20
Location
missouri
First Name
James
Truck Year
1977
Truck Model
c10
Engine Size
350
Hey guys! I just bought my first c10 recently with no engine or transmission. I would like to put in a 350 with the sm465 but I don't know what parts I need to figure out fitment of the 4 speed on a 3 speed crossmember. I already have the transmission, clutch, flywheel, bellhousing, shifter handle, manual steering column, and a two-piece driveshaft that might fit it. The truck used to have the 250 inline 4 with a 3 on the tree so it has the pedal and some of the linkage. Has anyone done the swap and if so do y'all have any insights on what I should do to prepare for it?
 
Strick

Strick

Full Access Member
Joined
Nov 25, 2020
Posts
1,355
Reaction score
3,316
Location
Dunn, NC
First Name
Harold
Truck Year
1979
Truck Model
C20 Crew
Engine Size
350
I believe that most of your manual stuff/linkage/hardware will work. I'd upgrade to a "12 clutch & also do a column swap to complete the changeover.

HS
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,356
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
You may need a 2wd "high hump" bolt-in trans tunnel. Your 3/tree cab should have the low hump trans tunnel that was also used with automatics.

You can use the same crossmember, but it may get used with another set of holes in the frame.
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
Jamesz said:
Hey guys! I just bought my first c10 recently with no engine or transmission. I would like to put in a 350 with the sm465 but I don't know what parts I need to figure out fitment of the 4 speed on a 3 speed crossmember. I already have the transmission, clutch, flywheel, bellhousing, shifter handle, manual steering column, and a two-piece driveshaft that might fit it. The truck used to have the 250 inline 4 with a 3 on the tree so it has the pedal and some of the linkage. Has anyone done the swap and if so do y'all have any insights on what I should do to prepare for it?
Click to expand...
You must be registered for see images attach


This is a k25 so its 3/4 ton , but the crossmemeber and trans is a sm465. I dont know how the sm465 2wd mounts, but if it uses the two pads setup then its likely like this.. but ifi uses a single mount in center, then
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,356
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
2wd 465 uses the single mount, like all the other 2wd's. There's two basic GM styles... one has two bolts for the crossmember, while the other just uses one. The common aftermarket urethane mounts, like Energy Suspension are designed to replace both styles.
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,194
Reaction score
8,034
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Why four when you can have five?
 
J

Jamesz

Junior Member
Joined
Sep 12, 2024
Posts
25
Reaction score
20
Location
missouri
First Name
James
Truck Year
1977
Truck Model
c10
Engine Size
350
SquareRoot said:
Why four when you can have five?
Click to expand...
I would definitely have loved to get a five speed but the transmission I got was a really good deal, so I had to go with it this time. But if I keep this truck for a long time I will most definitely be upgrading to a 5 or 6 speed.
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
Jamesz said:
I would definitely have loved to get a five speed but the transmission I got was a really good deal, so I had to go with it this time. But if I keep this truck for a long time I will most definitely be upgrading to a 5 or 6 speed.
Click to expand...
6. Tremec
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,194
Reaction score
8,034
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
After 5 you may as well just run a CVT lol.
 
J

Jamesz

Junior Member
Joined
Sep 12, 2024
Posts
25
Reaction score
20
Location
missouri
First Name
James
Truck Year
1977
Truck Model
c10
Engine Size
350
bucket said:
You may need a 2wd "high hump" bolt-in trans tunnel. Your 3/tree cab should have the low hump trans tunnel that was also used with automatics.

You can use the same crossmember, but it may get used with another set of holes in the frame.
Click to expand...
Okay cool! so I was just going to cut a small hole the size of the shifter to begin with but now I see what you are saying about the top of the transmission needing that extra clearance. I'll try and get one of those ordered. I was going to try and put the engine and transmission in this weekend, but I think for the time being just drop the engine in and put the transmission in later.
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
SquareRoot said:
After 5 you may as well just run a CVT lol.
Click to expand...
its 5 with a granny low

so my bad I Thought it was 6 speed, But isnt the nv trans only 4 with a granny low?

Although they do sell more speeds, but the only difference is 1st becomes a normal range and 6th is a 2nd OD
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
Jamesz said:
Okay cool! so I was just going to cut a small hole the size of the shifter to begin with but now I see what you are saying about the top of the transmission needing that extra clearance. I'll try and get one of those ordered. I was going to try and put the engine and transmission in this weekend, but I think for the time being just drop the engine in and put the transmission in later.
Click to expand...
your cab might not have a coveer which can be removed without cutting

So if you get a cover, you can cut it with that as a template
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,356
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
AuroraGirl said:
your cab might not have a coveer which can be removed without cutting

So if you get a cover, you can cut it with that as a template
Click to expand...

Correct. Cut the opening so that there is still a 3/4" to 1" flange to attach the new trans hump. You can simply use self tappers, or drill larger holes in the base flange and use threaded j-clips, or install nutserts in the base flange for bolts to thread into. Having the removable cover is super handy too.
 
You must log in or register to reply here.

Similar threads

T
3 on the tree
2 3
Replies
32
Views
2K
JBswth
J
O
3 speed Column Shifter parts
Replies
3
Views
1K
Rick76
R
H
Replacement 3-on-the-tree steering column...
Replies
1
Views
147
Vbb199
Vbb199
S
1984 3 speed transmission
Replies
3
Views
591
Selo
S
D
3 on the tree problem.
Replies
9
Views
2K
Rick76
R

Latest posts

Forum statistics

Threads
44,175
Posts
950,931
Members
36,299
Latest member
gman64
Top