What new tools have you got lately?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,609
Reaction score
9,151
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I'm putting explorer rear discs on the 9" so I hillbilly engineered a drill fixture. Bought a cheapo bolt pattern template, a steel spacer and a set of HF transfer punches. The rotors register on the center hub so it doesnt have to be perfect.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I don't know if this will help anyone or not. But the way I have redrilled hubs and rotors. I took a wheel adapter I had and drove the studs out,bolted it firmly to the hub and rotor and used the blank holes left by taking the studs out to transfer punch my bolt pattern. Level everything on a drill press and redrill, done it lots of times,so far so good.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,376
Reaction score
10,469
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
I'm putting explorer rear discs on the 9" so I hillbilly engineered a drill fixture. Bought a cheapo bolt pattern template, a steel spacer and a set of HF transfer punches. The rotors register on the center hub so it doesnt have to be perfect.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I'm going to have to do that to my front rotors. I can't find a set of matching wheels in a 5 on 5. 5 on 4.75 is all I can find. So I'll be doing the some thing.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,376
Reaction score
10,469
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
I don't know if this will help anyone or not. But the way I have redrilled hubs and rotors. I took a wheel adapter I had and drove the studs out,bolted it firmly to the hub and rotor and used the blank holes left by taking the studs out to transfer punch my bolt pattern. Level everything on a drill press and redrill, done it lots of times,so far so good.
That's a great idea. I have a set of spacers I can use.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,376
Reaction score
10,469
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
My next door neighbors that I cut their lawn when I cut mine got me this. She wasn't sure if I had a use for it...lol. oh Mr. Clean has a use.
 

Attachments

  • 20240825_092428.jpg
    20240825_092428.jpg
    152.6 KB · Views: 32
  • 20240825_095248.jpg
    20240825_095248.jpg
    166 KB · Views: 32

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,345
Reaction score
3,404
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
My next door neighbors that I cut their lawn when I cut mine got me this. She wasn't sure if I had a use for it...lol. oh Mr. Clean has a use.
wow, seeing that made me think why not zip tie a magnet to those small items that are hanging. Snap and your done. I've got chains, hoses, adapters and other misc hung by nails that drop like a fly if touched.

Well $h|t, there's an idea for ya.

Thanks dude, link below for example of what I have already.

Magnetic hangers (hangers removable)
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,609
Reaction score
9,151
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I made this sawzall powered wire brush a while back, posted right after I did it. Thought some might like to see it,makes cleaning threads etc. much faster and easier. It's just a junk Sawzall blade I had laying around and a junk wire brush. Drilled 2 holes sunk 2 screws. Done.
 

Attachments

  • 20240829_125853.jpg
    20240829_125853.jpg
    62.2 KB · Views: 35
Last edited:

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,488
Reaction score
8,119
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,258
Reaction score
12,187
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
I made this sawzall powered wire brush a while back, posted right after I did it. Thought some might like to see it,makes cleaning threads etc. much faster and easier. It's just a junk Sawzall blade I had laying around and a junk wire brush. Drilled 2 holes sunk 2 screws. Done.

That, my friend, is brilliant!

I'll be making my own very soon.

Thank you.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,609
Reaction score
9,151
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
That, my friend, is brilliant!

I'll be making my own very soon.

Thank you.
The way I was going to do it,but got lazy was Sawzall down the center of the blade then drill screw holes all the way through. I still think it would be better that way,but this works and was stupid easy.
 

justhorns

Full Access Member
Joined
Jun 1, 2022
Posts
296
Reaction score
798
Location
Denver
First Name
Lee
Truck Year
81
Truck Model
C10
Engine Size
250
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
I love tools, but as I work on all sorts of vehicles, I have a more universal kit with metric and SAE sizes and lots of bits and it comes in a blow mold stupid box. I use it all the time. This one from HOBO junk for $40. But, It works well on many vehicles. Customers always ask me "HUH, how'd you get the steering wheel off?"
 

Attachments

  • Image 8-29-24 at 4.52 PM.jpeg
    Image 8-29-24 at 4.52 PM.jpeg
    11.4 KB · Views: 25

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,609
Reaction score
9,151
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Easy enough without buying anything. Take an appropriate sized junk socket cut 2 pie shaped wedges out with a cutoff wheel. Place a washer on top thread a nut and bolt through the washer and socket. Honestly I think I've done it with just the washer bolt,nut,and socket. No windows in it.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,376
Reaction score
10,469
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
I
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Is that the tool to remove the pivot pin? The pic isn't that great and part of the name is flash reflection.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,376
Reaction score
10,469
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
Yes, that is the pivot pin puller
This is the one I have and it works the few times I have used it. The one you have a pic of would probably go just as good.
 

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
449
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
I have that exact tool. You can make one but as cheap as that is, IMO just buy it. It'll be one of those things that you'll lose cuz it's small, no case, and rarely gets used. I think I've bought at least 2 in my life.
 

Latest posts

Forum statistics

Threads
44,424
Posts
957,542
Members
36,776
Latest member
Love Samantha
Top