What new tools have you got lately?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,304
Reaction score
8,440
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Rustisbest said:
I'm putting explorer rear discs on the 9" so I hillbilly engineered a drill fixture. Bought a cheapo bolt pattern template, a steel spacer and a set of HF transfer punches. The rotors register on the center hub so it doesnt have to be perfect.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Click to expand...
I don't know if this will help anyone or not. But the way I have redrilled hubs and rotors. I took a wheel adapter I had and drove the studs out,bolted it firmly to the hub and rotor and used the blank holes left by taking the studs out to transfer punch my bolt pattern. Level everything on a drill press and redrill, done it lots of times,so far so good.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,270
Reaction score
9,960
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
Rustisbest said:
I'm putting explorer rear discs on the 9" so I hillbilly engineered a drill fixture. Bought a cheapo bolt pattern template, a steel spacer and a set of HF transfer punches. The rotors register on the center hub so it doesnt have to be perfect.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Click to expand...
I'm going to have to do that to my front rotors. I can't find a set of matching wheels in a 5 on 5. 5 on 4.75 is all I can find. So I'll be doing the some thing.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,270
Reaction score
9,960
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
Ricko1966 said:
I don't know if this will help anyone or not. But the way I have redrilled hubs and rotors. I took a wheel adapter I had and drove the studs out,bolted it firmly to the hub and rotor and used the blank holes left by taking the studs out to transfer punch my bolt pattern. Level everything on a drill press and redrill, done it lots of times,so far so good.
Click to expand...
That's a great idea. I have a set of spacers I can use.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,270
Reaction score
9,960
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
My next door neighbors that I cut their lawn when I cut mine got me this. She wasn't sure if I had a use for it...lol. oh Mr. Clean has a use.
 

Attachments

  • 20240825_092428.jpg
    20240825_092428.jpg
    152.6 KB · Views: 29
  • 20240825_095248.jpg
    20240825_095248.jpg
    166 KB · Views: 27
Camar068

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,276
Reaction score
3,299
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
Mr Clean said:
My next door neighbors that I cut their lawn when I cut mine got me this. She wasn't sure if I had a use for it...lol. oh Mr. Clean has a use.
Click to expand...
wow, seeing that made me think why not zip tie a magnet to those small items that are hanging. Snap and your done. I've got chains, hoses, adapters and other misc hung by nails that drop like a fly if touched.

Well $h|t, there's an idea for ya.

Thanks dude, link below for example of what I have already.

Magnetic hangers (hangers removable)
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,304
Reaction score
8,440
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I made this sawzall powered wire brush a while back, posted right after I did it. Thought some might like to see it,makes cleaning threads etc. much faster and easier. It's just a junk Sawzall blade I had laying around and a junk wire brush. Drilled 2 holes sunk 2 screws. Done.
 

Attachments

  • 20240829_125853.jpg
    20240829_125853.jpg
    62.2 KB · Views: 30
Last edited:
Radiohead

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,456
Reaction score
8,004
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
 
Blue Ox

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,176
Reaction score
11,868
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
Ricko1966 said:
I made this sawzall powered wire brush a while back, posted right after I did it. Thought some might like to see it,makes cleaning threads etc. much faster and easier. It's just a junk Sawzall blade I had laying around and a junk wire brush. Drilled 2 holes sunk 2 screws. Done.
Click to expand...

That, my friend, is brilliant!

I'll be making my own very soon.

Thank you.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,304
Reaction score
8,440
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Blue Ox said:
That, my friend, is brilliant!

I'll be making my own very soon.

Thank you.
Click to expand...
The way I was going to do it,but got lazy was Sawzall down the center of the blade then drill screw holes all the way through. I still think it would be better that way,but this works and was stupid easy.
 
justhorns

justhorns

Full Access Member
Joined
Jun 1, 2022
Posts
288
Reaction score
762
Location
Denver
First Name
Lee
Truck Year
81
Truck Model
C10
Engine Size
250
Radiohead said:
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Click to expand...
I love tools, but as I work on all sorts of vehicles, I have a more universal kit with metric and SAE sizes and lots of bits and it comes in a blow mold stupid box. I use it all the time. This one from HOBO junk for $40. But, It works well on many vehicles. Customers always ask me "HUH, how'd you get the steering wheel off?"
 

Attachments

  • Image 8-29-24 at 4.52 PM.jpeg
    Image 8-29-24 at 4.52 PM.jpeg
    11.4 KB · Views: 21
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,304
Reaction score
8,440
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Radiohead said:
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Click to expand...
Easy enough without buying anything. Take an appropriate sized junk socket cut 2 pie shaped wedges out with a cutoff wheel. Place a washer on top thread a nut and bolt through the washer and socket. Honestly I think I've done it with just the washer bolt,nut,and socket. No windows in it.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,270
Reaction score
9,960
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
I
Radiohead said:
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Click to expand...
Is that the tool to remove the pivot pin? The pic isn't that great and part of the name is flash reflection.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,270
Reaction score
9,960
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
nvrenuf said:
Yes, that is the pivot pin puller
Click to expand...
This is the one I have and it works the few times I have used it. The one you have a pic of would probably go just as good.
www.ebay.com

Saginaw Steering Column Pivot Pin Remover Tool | eBay

Find many great new & used options and get the best deals for Saginaw Steering Column Pivot Pin Remover Tool at the best online prices at eBay! Free shipping for many products!
www.ebay.com
 
mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
448
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
Radiohead said:
You must be registered for see images attach

Anyone have or use one of these? I may be needing one of these with the column project. I won't get one unless I need to, but wondering what others have to say about it.
You must be registered for see images attach

Not like it breaks banks or anything.... but $11 is $11 worthless dollars.
Click to expand...
I have that exact tool. You can make one but as cheap as that is, IMO just buy it. It'll be one of those things that you'll lose cuz it's small, no case, and rarely gets used. I think I've bought at least 2 in my life.
 
You must log in or register to reply here.

Similar threads

hey mister
I got the green light.
Replies
4
Views
476
squaredeal91
squaredeal91
mattsk8
I have this other Square body
Replies
1
Views
429
Grit dog
Grit dog
CheemsK1500
Biggest jobs you have completed in the shortest amount of time.
2 3
Replies
39
Views
3K
Trucksareforwork
Trucksareforwork
R
New guy Have an 85 C-30 single cab Dually
2
Replies
16
Views
792
496bb
496bb
C
What Engine Do I Have
Replies
9
Views
1K
Copakekid
C

Latest posts

Forum statistics

Threads
43,931
Posts
945,929
Members
35,975
Latest member
jm608
Top