Brake light keeps going out

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

84GMCSierra

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
364
Reaction score
432
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Good Morning everyone. Got a question about my right brake light, on my 84 C2500. I've replaced the socket/pigtail twice now, and the brake light keeps going out, then will start working again. When it works, it goes for quite awhile then all of a sudden it quits working. Taillight on the right never goes out. Just the brake light. No issues with the left side. Ground issue? I'm thinking of replacing the harness as I know it's kind of a mess from being a farm truck at one time. Who do you all recommend for one that isn't crazy expensive? Or should I just take mine out and make sure it's in good shape?
Thanks and hope you all had a a good weekend.
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,865
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
84GMCSierra said:
Good Morning everyone. Got a question about my right brake light, on my 84 C2500. I've replaced the socket/pigtail twice now, and the brake light keeps going out, then will start working again. When it works, it goes for quite awhile then all of a sudden it quits working. Taillight on the right never goes out. Just the brake light. No issues with the left side. Ground issue? I'm thinking of replacing the harness as I know it's kind of a mess from being a farm truck at one time. Who do you all recommend for one that isn't crazy expensive? Or should I just take mine out and make sure it's in good shape?
Thanks and hope you all had a a good weekend.
Click to expand...
when you say "out" do you mean it just wont work, it works with tail light at half brightness but it wont work at brake at full brightness, does the turn signal still work?

Or you mean the bulb burns out? If the bulb burns out on brake, but it still works for tail/turn, then you may just have crappy bulbs. The filaments are different, so you shouldnt have them both burn out for an issue only affecting one circuit.
 
Jgonick

Jgonick

Full Access Member
Joined
Jan 12, 2017
Posts
288
Reaction score
372
Location
West Texas
First Name
Joel
Truck Year
1985
Truck Model
K10
Engine Size
350
Do easy things first. Check the connections of DK-GRN-19 wire. Make sure it is connected well at turn signal switch connector (steering column) and the bulkhead and there should be one at the back of the truck on the run to the tail lights.

FYI- DK-GRN-19 turns into a YEL at last connection before right tail light

And yes, check the ground. see attachment.
 

Attachments

  • 84_brake light.png
    84_brake light.png
    160.8 KB · Views: 32
Last edited:
84GMCSierra

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
364
Reaction score
432
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Thanks everyone. Everything but the brake light on the right side functions normal. Might be cheap element but will check all the wiring
 
Jgonick

Jgonick

Full Access Member
Joined
Jan 12, 2017
Posts
288
Reaction score
372
Location
West Texas
First Name
Joel
Truck Year
1985
Truck Model
K10
Engine Size
350
84GMCSierra said:
Everything but the brake light on the right side functions normal
Click to expand...
Even the back right turn signal works with the brake light out?

They use the same filament of the bulb and wiring from the turn signal switch.
 
Last edited:
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,865
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
Jgonick said:
Even the back right turn signal works with the brake light out?

They use the same filament of the bulb and wiring from the turn signal switch.
Click to expand...
I thought th turn signal uses the smaller filament

Well, now that I think of it, that makes sense, because the turn signal would need to stand out from the tail lamp right? And when foot on the brake that needs to flash and be obvious
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,932
Reaction score
12,153
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
AuroraGirl said:
when you say "out" do you mean it just wont work, it works with tail light at half brightness but it wont work at brake at full brightness, does the turn signal still work?

Or you mean the bulb burns out? If the bulb burns out on brake, but it still works for tail/turn, then you may just have crappy bulbs. The filaments are different, so you shouldnt have them both burn out for an issue only affecting one circuit.
Click to expand...
Nvm
 
Jgonick

Jgonick

Full Access Member
Joined
Jan 12, 2017
Posts
288
Reaction score
372
Location
West Texas
First Name
Joel
Truck Year
1985
Truck Model
K10
Engine Size
350
If- big “IF”. It truly doesn’t work when brakes are pressed. AND everything else works on back right (right turn signal and hazards). I would suspect a bad turn signal switch.

Turn signal switch provides different power sources to the DK-GRN wire depending on braking, right turn signal, or hazards.
 
Last edited:
Y

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
158
Reaction score
181
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
A bad ground can be confusing - what will sometimes happen (my friend Dave's 1987 Chevy did this one) will be if the ground is bad, current will partically flow back through the other filiment and make it seem like its working - you press the brake and it comes on, turn on the lights and it comes on - press the brake while the lights are on, and it goes off! On tail light and marker lights, I always suspect the ground to be at fault 1st. As old as these trucks are, corrosion and dirt have had plenty of time to get in and work their evil....
 
Matt69olds

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,447
Reaction score
3,816
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Eliminate all the other possibilties first, but if you have random taillight issues that can’t be solved, more than likely you have a defective turn signal switch. There are a bunch on contacts that have to make and break connections for the brake and turn signals to function, it’s kinda amazing they don’t fail more often than they do.
 
84GMCSierra

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
364
Reaction score
432
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Blinker works fine
Matt69olds said:
Eliminate all the other possibilties first, but if you have random taillight issues that can’t be solved, more than likely you have a defective turn signal switch. There are a bunch on contacts that have to make and break connections for the brake and turn signals to function, it’s kinda amazing they don’t fail more often than the
Click to expand...

Matt69olds said:
Eliminate all the other possibilties first, but if you have random taillight issues that can’t be solved, more than likely you have a defective turn signal switch. There are a bunch on contacts that have to make and break connections for the brake and turn signals to function, it’s kinda amazing they don’t fail more often than they do.
Click to expand...
I'm already planning on replacing the switch after I get my engine next week. It's probably the original.
 
You must log in or register to reply here.

Similar threads

P
Brake light grounding
Replies
3
Views
380
Ricko1966
R
C
T/L CTSY fuse keeps blowing
2
Replies
25
Views
2K
RustyPile
R
Elliot W
Tail light brake light issue
2
Replies
27
Views
3K
AuroraGirl
AuroraGirl
medxsa13
Keeps Cutting Out
Replies
4
Views
768
Rusty Nail
Rusty Nail
Chris64
Rear brake bleeding struggles
2 3
Replies
36
Views
2K
Chris64
Chris64

Latest posts

Forum statistics

Threads
44,075
Posts
948,870
Members
36,146
Latest member
Nuggets40
Top