Toad455
Full Access Member
- Joined
- Aug 3, 2023
- Posts
- 88
- Reaction score
- 63
- Location
- North Texas
- First Name
- Kevin
- Truck Year
- 1978
- Truck Model
- C10
- Engine Size
- 6.0
What year are the hinges in the pics?
Door Hinge Spring Replacement
- Thread starter C10_Blackie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
What year are the hinges in the pics?
Toad455
Full Access Member
- Joined
- Aug 3, 2023
- Posts
- 88
- Reaction score
- 63
- Location
- North Texas
- First Name
- Kevin
- Truck Year
- 1978
- Truck Model
- C10
- Engine Size
- 6.0
Rickf
Full Access Member
- Joined
- Jul 29, 2017
- Posts
- 550
- Reaction score
- 686
- Location
- Grafton NH
- First Name
- Rick
- Truck Year
- 1974, 1954 & a 1937
- Truck Model
- K20
- Engine Size
- 350
That's on my '93.
Snoots
Full Access Member
- Joined
- Jan 23, 2013
- Posts
- 8,495
- Reaction score
- 17,177
- Location
- Georgia
- First Name
- Roger
- Truck Year
- 1973
- Truck Model
- Jimmy Sierra
- Engine Size
- 350 w/203
Yeah, but those rollers are supposed to turn freely and NOT be stiff as his. He needs to clean out the old grease. He's welcome.
But that video does nothing to help with the spring.
I found replacement springs at CJ Pony Parts but nothing on how to replace them.
- Joined
- Oct 30, 2019
- Posts
- 3,026
- Reaction score
- 6,945
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
Here is the tool, Cut up a socket to make one if you can't find it to buy. The tool works great. 1/2" drive
You must be registered for see images attach
You must be registered for see images attach
C10_Blackie
Full Access Member
- Joined
- Jan 2, 2024
- Posts
- 64
- Reaction score
- 138
- Location
- Seattle, WA
- First Name
- Rob
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 350
Yeah - I see now that my rollers are binding because of paint overspray. But it was a nice quick fix for me to give the roller a turn and have the door start closing nicely again.
I ordered a replacement left-hand spring from LMC and I guess I'm going to find out for myself if it's possible to get one of these things on without removing either the door or the fender. From what people said earlier in this thread, I guess it can be done.
C10_Blackie
Full Access Member
- Joined
- Jan 2, 2024
- Posts
- 64
- Reaction score
- 138
- Location
- Seattle, WA
- First Name
- Rob
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 350
Got it, I think. I was having problems visualizing what needs to be done. Turns out at least C3 Corvettes have a similar spring and now I can see how the tool suggested above would work. I think I might be able to do it with a thin pry bar. Here's the basic procedure:
xc_hide_links_from_guests_guests_error_hide_media
Old Guy Bill
Full Access Member
- Joined
- Sep 10, 2023
- Posts
- 398
- Reaction score
- 1,225
- Location
- KY
- First Name
- Bill
- Truck Year
- 1978
- Truck Model
- K20
- Engine Size
- 400
On my ‘78 hinges the springs seemed OK, but both rollers were beyond repair.
I just replaced the whole hinge on both sides.
I just replaced the whole hinge on both sides.
C10_Blackie
Full Access Member
- Joined
- Jan 2, 2024
- Posts
- 64
- Reaction score
- 138
- Location
- Seattle, WA
- First Name
- Rob
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 350
I’m pleased to report that the method in the video for the Corvette also worked on my 1981 C10. You don’t have to remove the door or the fender. You just have to drop the spring into position, pry it over from the bottom and tap it up into place.
There isn’t a lot of room to work in there so you will definitely need a thin pry bar/tool like the one used in the video. There was nothing in my garage that would work. I was about to head to the hardware store and happened to run into a neighbor who had a little bar that had just enough of a bend to get it done.
Nice to not constantly get hit by the driver’s door anymore.
There isn’t a lot of room to work in there so you will definitely need a thin pry bar/tool like the one used in the video. There was nothing in my garage that would work. I was about to head to the hardware store and happened to run into a neighbor who had a little bar that had just enough of a bend to get it done.
Nice to not constantly get hit by the driver’s door anymore.
- Joined
- Oct 30, 2019
- Posts
- 3,026
- Reaction score
- 6,945
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
Glade you got it! The tool actually works from the top. Hook the spring on the bottom, and slide it up. With the tool in place, short extension and ratchet at the top, twist to hold a little tension. Remove your hand, twist the tool and spring around where it goes, push down on the ratchet to set the spring. With the tool, less than 10 seconds.
I did some springs the way you did until I got the tool.
C10_Blackie
Full Access Member
- Joined
- Jan 2, 2024
- Posts
- 64
- Reaction score
- 138
- Location
- Seattle, WA
- First Name
- Rob
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 350
Thanks! Once you get the hang of it, prying it over from the bottom isn’t hard - but I’d be happy to never have to do it again…
