Chris64's latest activity
-
If your not happy, 6 on the label and 7 detents.....send it back. You didn't get what you paid for. Having to put it in between is... -
So as usual, I started a task - get my AC working - and then I got distracted with other things. * Why aren't my dash lights working...
-
-
Chris64 replied to the thread Removing instrument panel - dealing with the oil pressure line.This is a good description of where I'm at now. Dash pad, glovebox and bezel removed. left and right plenum's removed. Now I need to...
-
Chris64 reacted to 75gmck25's post in the thread Removing instrument panel - dealing with the oil pressure line with
Like.
I’ve always disconnected the oil line in the engine compartment. It’s not real hard to reach, and the two nuts for the compression... -
Chris64 reacted to RaisedK5's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
Ya. Manual says just reach up behind and take off the nut.
-
Chris64 reacted to PrairieDrifter's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
You don't need to pull the cluster to work on the hvac. Everything should come out the bottom of the dash. May have to pull the bezel...
-
Chris64 posted the thread Removing instrument panel - dealing with the oil pressure line in Tech Discussion.This is a strange thing that I haven't found any help on the internet at all. It's a 1974 K-20. I was trying to remove the instrument...
-
Chris64 replied to the thread Proportioning Valve and Bleeding.I had this problem too, which sucked because my family seems to sense when I need a brake pumper and they disappear. I ended up...
-
This is the one I bought https://a.co/d/8EupJ1X
-
Chris64 replied to the thread Wanting 4" suspension suggestions.I don't plan on hardcore off-roading, but we are right next to the desert so I wouldn't want to take that option off the table. It's...
-
-
How much are you planning on twisting up the truck off road? The more articulation you have the more room in the wheel wells you need...
-
Agreed. If you're planning on street-driving with some light off-roading, a 4" lift with 35's should be fine...as long as you don't go...
-
Can't answer about the ceiling as I have never applied it up there. But as far as the doors, it makes a HUGE different putting it on the...
-
Chris64 replied to the thread Wanting 4" suspension suggestions.OK, so I'm still trying to figure out the optimal setup and I'm worried that a 4" lift just isn't enough for 35" tires. I don't want to...
-
Chris64 replied to the thread Wanting 4" suspension suggestions.Well the price is certainly right for these. https://www.amazon.com/gp/product/B000E3DU1O/ Of course that's lacking the U-bolts and...
