Recent content by 75BEASTK20

  1. 75BEASTK20

    K20 upgrades. EDELBROCK AVS II. Why so negative ?

    Nothing wrong with a really good tuned quadrahog. I just find the AVS so easy to tune. Change jets and metering rods in 5 min or less. Very easy
  2. 75BEASTK20

    Need to replace rubber fuel lines on top of both tanks….

    I had to measure and cut a little steel to fold back, to access the middle cab mount bolts. It has a caged nut in size and they are almost 100% fu**ed, and just sit there an spin. Use plenty of "Break Away" or "PB blaster" or any spray lubricant and work the bolt backwards and forwards and...
  3. 75BEASTK20

    Need to replace rubber fuel lines on top of both tanks….

    AND YES......it's definitely a good time to replace your one set of body bushing mounts.
  4. 75BEASTK20

    Need to replace rubber fuel lines on top of both tanks….

    Loosely cover tank(s) with a wet blanket underneath, to avoid sparks hitting any tanks after pumping out as much fuel as possible. Disconnect hose(s) from filler tube(s) with zip cutter (WEAR PPE GLOVES AND GOGGLES) Plasma cut the bolts from underneath. This should take approximately 6 seconds...
  5. 75BEASTK20

    Steering Column needs to be rebuild

    Here's the link for the columns at LMC if that helps. https://www.lmctruck.com/steering/steering-column-parts/cc-1973-78-tilt-wheel-steering-column
  6. 75BEASTK20

    Steering Column needs to be rebuild

    I have a problem. I have a 1975 K20, factory power steering, with NO TILT COLUMN. I found the column at LMC. They list two. I am getting the paintable one, for floor column shift. SM465 I've looked everywhere to see which is the correct part between these two (BELOW) for my truck. This is...
  7. 75BEASTK20

    Throttle cable way too long

    Luckily the truck was NEVER bent. If it was, I couldn't do it.
  8. 75BEASTK20

    Throttle cable way too long

    I think this will work............Once I get into it deeper. There may have to be some modifications ,but with fabrications I think it can be done with an LMC bed kit. I'm talking about the supports etc. I think the big secret is to go slow. Square everything up. Whatya think bucket?
  9. 75BEASTK20

    Throttle cable way too long

    Thanks for that info. I have an old friend that is an excellent "fabricator". As well, I'll check salvage yards. Even if I can get old rusted ones, we can 're make' them. We'll get 'er done. Somehow.
  10. 75BEASTK20

    Throttle cable way too long

    But, as I cruise the salvage yards in Texas, I will check and if they do have a wood bed, I'll snag the supports just in case.
  11. 75BEASTK20

    Throttle cable way too long

    I spoke at length with LMC and ordered all new supports ext. to put the wood bed on. Looks like everything is there.
  12. 75BEASTK20

    K20 upgrades. EDELBROCK AVS II. Why so negative ?

    Glad we're going down in the new truck. Winter tires. Winter ready.
  13. 75BEASTK20

    K20 upgrades. EDELBROCK AVS II. Why so negative ?

    I see that. Thanks
  14. 75BEASTK20

    Bucket Seat Tutorial

    Wish my floors were that good.
  15. 75BEASTK20

    Bucket Seat Tutorial

    NICE! But no room for my pet Gorilla
See more

Latest posts

Forum statistics

Threads
45,089
Posts
975,063
Members
38,026
Latest member
nbrizjr
Top