Wiper motor wiring help

[1973c10]

Can anyone tell me what wire go's where

Thanks much

You must be registered for see images attach

 

[74propu]

73 give me till saterday and I will get in my 74 and tell you what wires go where on the wiper motor and the switch.

 

[1973c10]

73 give me till saterday and I will get in my 74 and tell you what wires go where on the wiper motor and the switch.

That would be awesome thank you

 

[74propu]

Can anyone tell me what wire go's where

Thanks much

You must be registered for see images attach

wire 2 is 12v+ wire 1 is low speed - wire 3 is high speed - wire 2 also go's to washer pump . on the switch there is 3 connections starting with the one next to the steering column it is los speed the center is high speed and the one next to the door is the wash pump ground the switch is the ground. hope this helps.

 

[1973c10]

wire 2 is 12v+ wire 1 is low speed - wire 3 is high speed - wire 2 also go's to washer pump . on the switch there is 3 connections starting with the one next to the steering column it is los speed the center is high speed and the one next to the door is the wash pump ground the switch is the ground. hope this helps.

You rock thank you so much
I will let you know how it turns out

 

[1973c10]

wire 2 is 12v+ wire 1 is low speed - wire 3 is high speed - wire 2 also go's to washer pump . on the switch there is 3 connections starting with the one next to the steering column it is los speed the center is high speed and the one next to the door is the wash pump ground the switch is the ground. hope this helps.

Do I have this right ??

You must be registered for see images attach

 

[74propu]

that is right or that is how my wiper is wired

 

[1973c10]

that is right or that is how my wiper is wired

is there a ground wire running to the switch body
or dose it just ground to the dash ?
I hooked it up like shown in picture and nothing LOL

 

[Georgeb]

There should be a ground strap for the wiper motor. If you have power on all three leads like you should try grounding the case of the motor.

 

[1973c10]

There should be a ground strap for the wiper motor. If you have power on all three leads like you should try grounding the case of the motor.

I got it fixed thanks for all the help
it was a grading issue when I painted the fire wall
and put everything back together I should have
removed the paint from where the case of the motor grounds LOL