Will this lift fit my k5/jimmy?

[82jimmy]

Hey guys, so i’m planning on lifting my 82’ jimmy sierra classic and mainly want to go for an 8 inch kit. There are only a few options with the only one of my liking being the BDS suspension 8” lift kit with the nice fox shocks. My only concern is the products title says it’s only for 3/4 ton trucks. I’m planning on sticking with my 10 bolt axles as i won’t be doing any crazy off-roading or wheel/tire set up. Will that lift fit my jimmy? When i check vehicle fitment on the BDS website it says the lift will fit my jimmy but it’s obviously not 3/4 ton so any help, comments, advice, other options? Advice for reinforcing my 10 bolt axles? Thanks!

 

[82jimmy]

Description also says it only fits the rear 56 inch eye to eye leaf springs so i will be double checking that as well.

 

[nvrenuf]

Yes and no, the front springs and hardware will fit your Blazer HOWEVER, the rear u-bolts and 56" springs will not. The rear u-bolts will be for a 14 bolt which has bigger axles tubes than a 10 bolt and Blazers have 52" rear springs.

 

[DoubleDingo]

Why an 8 inch lift? That is an extreme amount of lift for a vehicle that won't be off roaded in a manner that warrants that much lift. 2 inch lift is plenty, 4 is more than enough.

 

[PrairieDrifter]

A blazer is not the choice for big lift and a street driver. It'll ride like crap. You'll be doing u joints every month lol

 

[82jimmy]

Why an 8 inch lift? That is an extreme amount of lift for a vehicle that won't be off roaded in a manner that warrants that much lift. 2 inch lift is plenty, 4 is more than enough

it’s not about wanting the functionality of a lift it’s about achieving a certain look

 

[82jimmy]

A blazer is not the choice for big lift and a street driver. It'll ride like crap. You'll be doing u joints every month lol

i guess i’ll get good at changing u joints then haha . I’m trying to do it the right way and i’ll do upgrades until it rides right . This isn’t my daily either i’m not too worried about extreme use on suspension . that’s why i’m on here asking for advice on achieving that lift properly!

 

[82jimmy]

Yes and no, the front springs and hardware will fit your Blazer HOWEVER, the rear u-bolts and 56" springs will not. The rear u-bolts will be for a 14 bolt which has bigger axles tubes than a 10 bolt and Blazers have 52" rear springs.

thank you! i did not want to change my rear axle maybe i’ll have to go for another option of lift . I might also just upgrade to a 14 bolt instead of wasting the money on the 10 bolt. I haven’t seen any advice on how to make them sturdy for a lift

 

[Tonimus]

It looks like both the 6" and 8" BDS kits come with lift blocks. I'd suggest calling them to see if you can get parts to make a 8" K5 kit.

 

[82jimmy]

It looks like both the 6" and 8" BDS kits come with lift blocks. I'd suggest calling them to see if you can get parts to make a 8" K5 kit.

thats a great suggestion i’ll keep in mind thanks !

 

[Zelph]

For this use I suggest doing a combination of a suspension lift and a body lift. Say like a 4 suspension and 3 body lift.
If not rock crawling and you don’t currently have a gov lock, the 10 bolt will suffice.