What new tools have you got lately?

[Swearbody]

got a stethoscope to track down some ticks and taps. Didn't really find any answers with it but it does as advertised. Still feel like I should have purchased the cheapest one I could find(7.99) vs (20) for the Lisle

You must be registered for see images attach

 

[wanderinthru]

Do a special built press table and plates count as new?

You must be registered for see images attach

 

[82sbshortbed]

I really like these vise grips $22 for the pair at home depot. Used the big ones to remove the seat belt stud. Worked great.

You must be registered for see images attach

 

[Frankenchevy]

Took advantage of tractor supply’s sale and picked up a 6’ tiller. It covers the tracks of the tractor by a couple inches on either side. Got home early today to prep the yard for seed.

You must be registered for see images attach

 

[wanderinthru]

Not because I wanted to. Some engineers figured I needed a pair of 150 dollar snap ring pliers???

You must be registered for see images attach

 

[Poppy 87]

Not because I wanted to. Some engineers figured I needed a pair of 150 dollar snap ring pliers???

You must be registered for see images attach

You building a late model GM 6 Speed?

 

[Midnightmoon]

Took advantage of tractor supply’s sale and picked up a 6’ tiller. It covers the tracks of the tractor by a couple inches on either side. Got home early today to prep the yard for seed.

You must be registered for see images attach

Very nice. I have an identical one from tractor supply that I bought approx 15 years ago it has been absolutely excellent with lots of hours of use.

You must be registered for see images attach

You must be registered for see images attach

 

[Frankenchevy]

Very nice. I have an identical one from tractor supply that I bought approx 15 years ago it has been absolutely excellent with lots of hours of use.

You must be registered for see images attach

You must be registered for see images attach

Hopefully I get as many years from mine as you have from yours.

I finished setting it up and cutting the pto shaft to length by around 3 and by dusk, I’d knocked out a few acres of the front yard already. It worked really well.

You must be registered for see images attach

 

[wanderinthru]

You building a late model GM 6 Speed?

No sir. Repairing a hydraulic cylinder. Held together with a 4 in internal snap ring, that is capitive to the end cap.... Can't see how one person can disassemble it without the locking pliers.....have a couple blood blisters as proof now??

 

[Midnightmoon]

Hopefully I get as many years from mine as you have from yours.

I finished setting it up and cutting the pto shaft to length by around 3 and by dusk, I’d knocked out a few acres of the front yard already. It worked really well.

You must be registered for see images attach

Your yard looks great. It is definitely a tool to have if you have property, plant large gardens, etc.

Yes, I have had very good luck with ours. I haven't had to do anything to it except general maintenance. Unfortunately, I've left it outside and the paint isn't the greatest at this point. But, it works like new.

 

[wanderinthru]

Well. Added this to the business today. It's either a 78 or 80 depending on the list you look at??

You must be registered for see images attach

 

[78C10BigTen]

Bought myself a pair of all in one wire strippers to install my new behind the seat sub.

 

[jake wells]

got a new ratchet today my old chineseium craftsman 36 tooth 3/8 stripped on me so now i got a gun metal craftsman 120 tooth 3/8 ratchet.

 

[Vbb199]

Winch plate, torque wrench, tranny and oil pressure gauge, cutoff discs, 6011 rods, a maul, a crowbar, sawzall blades, and a few other goodies.
Not bad for 240$

You must be registered for see images attach

 

[Snoots]

Winch plate, torque wrench, tranny and oil pressure gauge, cutoff discs, 6011 rods, a maul, a crowbar, sawzall blades, and a few other goodies.
Not bad for 240$

You must be registered for see images attach

Do we meet at the front, side or, rear of the bank?
Asking for a friend.