What is this wire / connector

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bruce Wingate

Full Access Member
Joined
May 20, 2021
Posts
154
Reaction score
89
Location
Long Island
First Name
Bruce
Truck Year
1984
Truck Model
K10
Engine Size
350
This connector with the yellow / purple wires is located near the bottom of my steering column. "Near" is relative. its under the dash in that general area.

I have a 1984 K10 with automatic trans (700r4).

Thanks,
Bruce.

[edited to add picture.]
You must be registered for see images attach
 
Last edited:

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Neutral safety switch.

The yellow wire should show power with the ignition in the “crank” position. If you put power on the purple wire, the engine should crank.
 

Bruce Wingate

Full Access Member
Joined
May 20, 2021
Posts
154
Reaction score
89
Location
Long Island
First Name
Bruce
Truck Year
1984
Truck Model
K10
Engine Size
350
Neutral safety switch.

The yellow wire should show power with the ignition in the “crank” position. If you put power on the purple wire, the engine should crank.
My googling told me it was the neutral safety switch too, but that was for manual trucks.

So now for stupid question: If this is the NSS, how come my truck starts just fine? Is this just an extra wire GM left in a common harness? And finally, I thought on the '84, that the NSS was handled mechanically from within the steering column somehow.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Pretty sure that is the connector body that plugs into the NSS maybe the switch has been bypassed somewhere else?
 

Newcman1

Junior Member
Joined
May 29, 2022
Posts
10
Reaction score
8
Location
Tulsa
First Name
Bill
Truck Year
1985
Truck Model
Chevy K10
Engine Size
350
The attached may help clarify. It's from my wiring manual for my 85 K10 suburban with 700R4. My truck wiring does not have this connector. NOt sure why your truck does unless like you mentioned they used a common harness.
 

Attachments

  • Clutch Start Interlock.jpg
    Clutch Start Interlock.jpg
    59.6 KB · Views: 71

greyghost

Full Access Member
Joined
Jun 15, 2022
Posts
50
Reaction score
15
Location
kansas
First Name
vic
Truck Year
1981
Truck Model
C10
Engine Size
250
put jumper wire in it, then it will start without pushing on clutch, use starter then to move truck into garage, off hiway, outta driveway so wife/mom doesn't hear you leave
 

Thedmax

Junior Member
Joined
Jul 6, 2022
Posts
3
Reaction score
0
Location
ione
First Name
Donovan
Truck Year
1984
Truck Model
c10
Engine Size
350
First post here been searching around for a while and found this thread. I hope I am not bringing back to old of a post!

If this is a NSS why does my auto have it. It looks like it is jumped in the terminal. And the diagram to me shows for auto there should not be a connector.

Why would it be burned up. Loose bad connector?!?
 

Attachments

  • C2D8E1D6-C2B4-4140-96C9-F2C0379B325E.jpeg
    C2D8E1D6-C2B4-4140-96C9-F2C0379B325E.jpeg
    98 KB · Views: 65
  • 1A79E989-DF19-4677-A97B-4739130B2ED9.jpeg
    1A79E989-DF19-4677-A97B-4739130B2ED9.jpeg
    99.8 KB · Views: 64
  • 57097022-684D-44BE-894F-94A331D02B72.jpeg
    57097022-684D-44BE-894F-94A331D02B72.jpeg
    82.6 KB · Views: 72

newguy11

Full Access Member
Joined
Aug 24, 2021
Posts
80
Reaction score
147
Location
New England
First Name
Private
Truck Year
1972-1987
Truck Model
C/k 10
Engine Size
305/350
Bringing this thread to the top again as I’m curious

Showing my ignorant here but. Don’t automatics have neutral safety switches? Isn’t that why the truck won’t start when in gear?
 

Thedmax

Junior Member
Joined
Jul 6, 2022
Posts
3
Reaction score
0
Location
ione
First Name
Donovan
Truck Year
1984
Truck Model
c10
Engine Size
350
Yes autos do But that switch is lower on the column almost to the firewall also would be responsible for reverse lights on a column shift.
If I am not mistaken this would be for the clutch safety switch.
 

Forum statistics

Threads
44,173
Posts
950,862
Members
36,288
Latest member
brentjo
Top