What have you done to your square lately??

[82sbshortbed]

Went with the pcv valve on driver's side valve cover

You must be registered for see images attach

Then I took it out for some gas and ride. Put my gopro hero on dash mount. After I got gas I was pulling out of tsc and got on it and got side to side. A nice one too. Then I got home to put it on my laptop. My laptop is a big NO Huge POS and didn't work. Damit!

 

[Burban1990]

Replaced front parking brake cable. Install aftermarket stereo us existing screws under the dash with a short body car stereo so I wouldn't have to carve up a factory stereo location.

 

[AuroraGirl]

As long as the wisconsin weather doesnt "eat" the bed.

Funnily, that bed IS the original bed off my truck. What kind of sadistic jeffrey dahmer skin-lampshade **** is that now???? on the trailer that is

 

[AuroraGirl]

I just bought a harbor freight cargo unloader, It was on sale for 29 dollars. im gonna install it tomorrow morning on my trailer which is a square box. Since I use it for garbage disposal having a crank mat push trash out instead of using a pitchfork and 10 minutes of my time that might be really nice.

If it is really good, long time in the future after I change my garbage operation to a 1/2 ton trailer instead, I will probably find it really useful for getting a load of gravel in my current trailer(3/4 ton, E range tires) and being able to crank it off and have a helper move the truck forward slowly and cut the spreading time down quite a bit,. I need new gravel for my driveway next year. Will have skidsteer working then, too, and can just smooth it out with that.

Will post pics of fitment tomorrow, since its a square box others may find it useful to know how well it fits and works in our trucks

 

[Paladin]

Popped the hood and looked at it for awhile with a beer like @82sbshortbed does his and started picturing in my mind what it's going to look like this coming summer. Want to put either a Weiand or Offenhauser tunnel ram with 2 big Holley 750's and street scoop that I got from @Rusty Nail! Then I drank another beer and looked at it some more. a few beers later and I was imagining Zoomies on it LOL and knew it was nap time!

 

[Rusty Nail]

I've had my eyes set one a 300-025 for a while.

https://www.holley.com/products/intakes/single_plane_manifolds/parts/300-25

You must be registered for see images attach

Holley "updated" it a couple of years ago and I wanted to swap in that for the current Weiand X-celerator 7546.

https://www.holley.com/products/intakes/single_plane_manifolds/parts/7547-1

You must be registered for see images attach

 

[Itali83]

Btw @Paladin me and you are in the minority of holley ppl lol

I only run Holley carbs. Got a spread bore on my 82. Kept the factory intake but threw the Quadra-bog in the trash and got a 650 Holley spread bore vacuum secondary carb. Love it!

ben

 

[jjester6000]

You must be registered for see images attach

I cleaned out the bed of O'l Yeller before work today since I'm doing a scrap run this weekend.

You must be registered for see images attach

Hopefully this wont be the last hurrah of this motor pulling a trailer and being filled up with junk. Hopefully it makes it the 20 miles to the scrap yard without throwing a rod.

You must be registered for see images attach

You must be registered for see images attach

I am hoping to get the new motor in before christmas, but that may not happen.

You must be registered for see images attach

 

[AuroraGirl]

You must be registered for see images attach

I cleaned out the bed of O'l Yeller before work today since I'm doing a scrap run this weekend.

You must be registered for see images attach

Hopefully this wont be the last hurrah of this motor pulling a trailer and being filled up with junk. Hopefully it makes it the 20 miles to the scrap yard without throwing a rod.

You must be registered for see images attach

You must be registered for see images attach

I am hoping to get the new motor in before christmas, but that may not happen.

You must be registered for see images attach

Your bed is in nice shape. hopefully a sanding a repaint is in its future?
on the bed floor that is

 

[CoggedBelt75]

Popped the hood and looked at it for awhile with a beer like @82sbshortbed does his and started picturing in my mind what it's going to look like this coming summer. Want to put either a Weiand or Offenhauser tunnel ram with 2 big Holley 750's and street scoop that I got from @Rusty Nail! Then I drank another beer and looked at it some more. a few beers later and I was imagining Zoomies on it LOL and knew it was nap time!

That’s a lot of cfms for a stock engine.
Here’s something visual while you’re sipping on some suds.

You must be registered for see images attach

 

[jjester6000]

Your bed is in nice shape. hopefully a sanding a repaint is in its future?
on the bed floor that is

Yea it is, and I am planning on doing that.

I just have to decide if I want to beeline it or not. I like the yellow wheel tubs/inner'bedsides, but berliner would protect it so well. I might just beeline the floor itself and repaint the wheel wells.

 

[Paladin]

That’s a lot of cfms for a stock engine.
Here’s something visual while you’re sipping on some suds.

You must be registered for see images attach

Gee, thanks Joe, now you have me drooling! lol Nice!! Having visions of a tunnel ram dancing in my head! Yes, a lot of CFM's but not a stock engine! Also have you noticed any difference with your carbs since you installed those deals on your carb nozzles?

 

[AuroraGirl]

Yea it is, and I am planning on doing that.

I just have to decide if I want to beeline it or not. I like the yellow wheel tubs/inner'bedsides, but berliner would protect it so well. I might just beeline the floor itself and repaint the wheel wells.

That is kinda how I would like to eventually do my bed. But prep is definitely key because any rust or moisture under that Im sure will just eat a bed

 

[CoggedBelt75]

Gee, thanks Joe, now you have me drooling! lol Nice!! Having visions of a tunnel ram dancing in my head! Yes, a lot of CFM's but not a stock engine! Also have you noticed any difference with your carbs since you installed those deals on your carb nozzles?

Throttle response is way more crisp than before is all I can really tell. I did have to lean out the A/F right off the bat on the carbs. Reckon the misty cloud richened it up a tad. In my case, it had to help since the fuel hitting the rotors is in a mist form vs a scattered stream.

 

[TotalyHucked]

Not mine, but went with a buddy to go pick this up today

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro