What have you done to your square lately??

[82sbshortbed]

What does that sound like?

It's not as loud as I thought but, it's not bad. I'm happy with it.

 

[82sbshortbed]

Few more plus the video of the gauge.

xc_hide_links_from_guests_guests_error_hide_media

You must be registered for see images attach

I'm just guessing but, I think it jumps like that because of the mechanical pump. An electric pump would be a smoother more constant pressure. If that makes sense.

 

[78C10BigTen]

I'm just guessing but, I think it jumps like that because of the mechanical pump. An electric pump would be a smoother more constant pressure. If that makes sense.

After swapping pumps it runs a smooth 9 psi but still no fuel in the filter and no squirts like if its pumping it.

 

[Poppy 87]

After swapping pumps it runs a smooth 9 psi but still no fuel in the filter and no squirts like if its pumping it.

9 psi seems too high for carburetor engine. Usually see gauge and regulator plumbed after the filter. Engine runs?

Sent from my XT1254 using Tapatalk

 

[78C10BigTen]

9 psi seems too high for carburetor engine. Usually see gauge and regulator plumbed after the filter. Engine runs?

Sent from my XT1254 using Tapatalk

Yup. Drive it daily. Thats why im confused why the filters empty but still runnin and drivin

 

[ajd89]

Its in and runs! Would have been sooner if the weather had been nicer this week. Cab floor is all wet had to change a heater hose dont think its that. I think ill be changing my heater core. Cant win lol. We lost power today too so I thought id fire up the jenny since it dont run much. That didnt go well either. Just glad I seen all the smoke in time. After you check the oil good idea to get the cap on good and tight I guess.

You must be registered for see images attach

You must be registered for see images attach

 

[Poppy 87]

Yup. Drive it daily. Thats why im confused why the filters empty but still runnin and drivin

Are you sure that the filter is empty and not totally full? Install your guage between the filter and carburetor and report the results

Sent from my XT1254 using Tapatalk

 

[78C10BigTen]

Are you sure that the filter is empty and not totally full? Install your guage between the filter and carburetor and report the results

Sent from my XT1254 using Tapatalk

100% sure. I can see just a trickle in the bottom at the inlet side

 

[82sbshortbed]

This made me curuios so i looked at mine. The one going to the carb is pretty much empty.

You must be registered for see images attach

The one before the pump is pretty much full.

You must be registered for see images attach

 

[82sbshortbed]

I fired it up and it didn't really get any fuller. It's a new pump too.

xc_hide_links_from_guests_guests_error_hide_media

Even reved it a couple of times.

 

[78C10BigTen]

This made me curuios so i looked at mine. The one going to the carb is pretty much empty.

You must be registered for see images attach

The one before the pump is pretty much full.

You must be registered for see images attach

I dont have one before the pump

 

[78C10BigTen]

Soundin good!

I fired it up and it didn't really get any fuller. It's a new pump too.

xc_hide_links_from_guests_guests_error_hide_media

Even reved it a couple of times.

 

[82sbshortbed]

I dont have one before the pump

Thought it couldn't hurt. Try and keep trash and rust getting to the pump.

 

[Turbo4whl]

This made me curuios so i looked at mine. The one going to the carb is pretty much empty.

You must be registered for see images attach

The one before the pump is pretty much full.

You must be registered for see images attach

The hose on your lower filter has a crack forming. Imported junk that they sell us now. Maybe this whole Ronia thing will bring back more manufacturing to this country.

 

[Goldie Driver]

Well this was actually last weekend but i been havin phone issues so i never got it posted. Started out by noticing no fuel in my filter with the truck runnin so i bought another fuel pump. I added a pressure gauge in line with my old pump and holy cow was it wildly erratic! So i commenced to putting on a new pump and inspecting the push rod. I messed up the plate gasket and didnt have another so i improvised! Got everythin all back together and it runs 9psi but still no fuel in the filter and seems to not pump it up there. Im lost because i drive it daily this way with no issue, hows that possible?!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Nice improvise !