What have you done to your square lately??

[Stepside Billy]

Just bought it so I got her in front of my garage to go through it. If it only would warm up and stop snowing!!

 

[firebane]

You must be registered for see images attach

got these off ebay today should help my buckseat conversion go smoothly

Lucky. How did you find those on ebay?

 

[Ghetto]

You must be registered for see images

Painted the stock wheels. Removed the charcoal canister and other useless emissions garbage.

 

[anubisani]

Lucky. How did you find those on ebay?

just doing bucket seats search , soon as I saw them I didn't even hesitate bcs I know these are like gold lol

 

[82k20]

been a while since ive been on here i sold my 82 k20 a while back i had a guy offer me more than i could pass up so she sold that day i decided i wanted another 1983 gmc jimmy from the origional owners cousin the trucks had the 305 took out and replaced with a mild 355 the 700r4 and the 208 were both rebuilt at the same time and both axles were regeared so far ive took the factory radiator out and replaced it with a new 3 row all welded and ive got a 31 gallon tank ordered

You must be registered for see images attach

http://i300.photobucket.com/albums/nn11/chevy19944x4/10953386_322706357938250_3188999800115188118_n_zpszc6w9wgu.jpg?1427771678658&1427771679252

You must be registered for see images attach

You must be registered for see images attach

 

[HotRodPC]

You must be registered for see images

Painted the stock wheels. Removed the charcoal canister and other useless emissions garbage.

I need to paint my wheels on the C20 too. Makes a hell of a difference with a good clean white paintjob and the OEM hub caps.

 

[hirschdalechevy]

Man I am bummed , pretty much all new parts on my 77 blazer but its started leaking trans. fluid out of the adapter plate between the turbo 400 / 205 so that is my project this weekend.Thought I had gone though just about everything but I guess not , it always the little things you find after the fact.

DANG IT!!!!!!! back in the shop.

You must be registered for see images attach

 

[HotRodPC]

That sux. Sorry to hear. You got it though. Just a PITA.

 

[Stepside Billy]

Took out the bench seat and pull the rubber mat and all the old, nasty insulation out. Vacuumed up years of dirt and dog hair.

 

[HotRodPC]

Took out the bench seat and pull the rubber mat and all the old, nasty insulation out. Vacuumed up years of dirt and dog hair.

Careful there buddy. You didn't get the memo? That's the stuff that holds these squares together.

 

[Stepside Billy]

Careful there buddy. You didn't get the memo? That's the stuff that holds these squares together.

No I didn't. Now I'm screwed!!

 

[slowlane]

In the past month I bought a used high top bed cap, new rear tires, got a spare wheel/tire, built a better hillbilly tailgate solution than my first design, and built a sleeping platform in the bed of the '85. I will be living out of it from late May to mid August while travelling the country this summer.

The new tailgate setup and topper. The bed is totally rusted away where the tailgate hinges go so massive reconstruction would be required to repair it properly. Yes that is spray foam insulation oozing between the bed floor and rear door. This bed is essentially junk due to rot anyway so at this point I don't feel bad about such crappy repairs. I also made a new rear bed floor cross-member out of 2x4's because the original is MIA courtesy of the 6 month long road salted winters in NH.

You must be registered for see images

An interior view of the setup. I have a 4" thick foam pad that I will put on top of the platform.

You must be registered for see images

The front 2/3rd's of the platform lifts up for easier access to things underneath.

You must be registered for see images

 

[carlgm]

I finally decided to get the Baja wheels after the sales rep from 4wo|american racing rims gave me a good price. I chose the polished finish. Will upload pics once they are installed.

 

[Don5]

We just changed the drag link out today. We started on replacing body mount bushings. We got the two on the core support changed and got one bolt out in the back of the cab before stopping for the night.

 

[GTME94]

Bought an early 80's camaro gauge cluster with a tach to use the tach in my truck. Will buy another square body cluster to modify and keep my original stock.

I'm down in Georgia visiting my parents so I had to hit the junkyard.