What color is the wire for the fuel gauge?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jfkelley

Full Access Member
Joined
Apr 14, 2019
Posts
65
Reaction score
15
Location
Oklahoma City
First Name
John
Truck Year
1976
Truck Model
K10
Engine Size
350
I have a 76 K10 I'm doing an LS swap in it came stock from factory with dual tanks..Im going to one tank with electric fuel pump inside the 87 TBI tank on the drivers side I want to use the factory wiring so I can run the factory fuel gauge ..My question is can someone tell me what color is the wire for the stock the fuel gauge ?..I see two blue wires and and a black wire which is ground...But I have read on other forums its a pink wire I'm looking for ?..Can anyone confirm this ..I am lost when it comes to wiring...Thanks in advance
 
Last edited:

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,261
Reaction score
2,202
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
The wiring for a ‘76 would have the right tank as main and the left as auxiliary. It also uses a simple Pollack valve (either 3 or 6 port) for fuel, with only one power terminal to make it switch. Later trucks made the left tank the main, and used a 6 terminal fuel valve.

IIRC, the gauge sender wires on my ‘75 are tan, not pink. The main tank sender uses a tan wire and the other is tan with a white stripe.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
The wiring for a ‘76 would have the right tank as main and the left as auxiliary. It also uses a simple Pollack valve (either 3 or 6 port) for fuel, with only one power terminal to make it switch. Later trucks made the left tank the main, and used a 6 terminal fuel valve.

IIRC, the gauge sender wires on my ‘75 are tan, not pink. The main tank sender uses a tan wire and the other is tan with a white stripe.

Are they perhaps a faded pink that turned to a tan-ish color?
 

jfkelley

Full Access Member
Joined
Apr 14, 2019
Posts
65
Reaction score
15
Location
Oklahoma City
First Name
John
Truck Year
1976
Truck Model
K10
Engine Size
350
..
 
Last edited:

jfkelley

Full Access Member
Joined
Apr 14, 2019
Posts
65
Reaction score
15
Location
Oklahoma City
First Name
John
Truck Year
1976
Truck Model
K10
Engine Size
350
Are they perhaps a faded pink that turned to a tan-ish color?


I have connected my sending unit wire to both Tan with White Stripe and Tan ( Maybe Pink Faded wires ) one at a time and it goes all the way to the 3 o’clock position.. am I doing something wrong?.. The wires I have on the driver's side are the following ..Keep in mind this is going to be the tank I use and there is no gas in the tank , I can hear the fuel pump kick on when I turn ignition.

Thick Red wire that runs all the way to the back
Blue
Light Blue
Pink maybe Tan
Pink With White Stripe ( Could be faded tan)
Green

On passenger side there is one Tan wire with a white stripe leading to front of Truck ...

Am I missing something?..I checked the ground...Thaks In Advance
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,699
Reaction score
3,761
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
My ‘80 with dual tanks is a pinkish/tanish wire. It’s here on the bulkhead IIRC:

You must be registered for see images attach

ETA: looking at my notes I may have it pinned in the wrong spot, I think it should be in the hole above that.
 

jfkelley

Full Access Member
Joined
Apr 14, 2019
Posts
65
Reaction score
15
Location
Oklahoma City
First Name
John
Truck Year
1976
Truck Model
K10
Engine Size
350
If I understand this correctly I attach my Sending unit fuel gauge wire to the pinkish tan wire ?
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,699
Reaction score
3,761
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
If I understand this correctly I attach my Sending unit fuel gauge wire to the pinkish tan wire ?
With factory stuff it should only hook up one way... My factory sending unit wire had a kinda unique plug on the end.
 

jfkelley

Full Access Member
Joined
Apr 14, 2019
Posts
65
Reaction score
15
Location
Oklahoma City
First Name
John
Truck Year
1976
Truck Model
K10
Engine Size
350
Ok I think I get it ..That wire connects to the back of the Fuel Gauge ...? Am I wrong?
 
Last edited:

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,699
Reaction score
3,761
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Ok I think I get it ..That wire connects to the back of the Fuel Gauge ...? Am I wrong?
Yes, through the bulkhead & to the gauge. The rest of the dual tank wiring goes through the firewall in a different spot.
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
where can i find a replacement sending unit wire? mine is cut and the pop on end is missing ? anyone know who carries this?
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
where can i find a replacement sending unit wire? mine is cut and the pop on end is missing ? anyone know who carries this?

I'd like to know this as well. Previously, I have just scavenged and replaced the connector with an old used one.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,853
Reaction score
5,646
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
https://www.summitracing.com/parts/aww-ca97607

Ive never pulled that connector apart, but this seems correct other than wrong application with the little pass through grommet. There's a couple other options in the related section.

I always thought mine were orange wires..
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,853
Reaction score
5,646
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350

Latest posts

Forum statistics

Threads
44,157
Posts
950,569
Members
36,268
Latest member
JUKA
Top