Weight of Hood and Bed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fumehappy

Junior Member
Joined
May 23, 2016
Posts
16
Reaction score
1
Location
New York
First Name
John
Truck Year
1984
Truck Model
C10
Engine Size
305 5.0L
Good Afternoon,
I need to pull the Hood and bed for my 8' 84 C10 for painting/cleaning purposes. I don't really have helpers, so I was wondering how much each weighs. I have a "loading" area that's only slightly higher than the bed I was thinking I could slide it off onto with some 2x6's or something.
Thanks!
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,451
Reaction score
9,403
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
The hood isn't heavy. It's just large, but you should be able to figure out a way to get it off with just you. It will be harder to get back on by yourself and get it lined up correctly but it can be done.

An 8' foot bed is significantly heavier (don't know exact weight). When putting my bed back on I had four guys (counting me) help with getting the bed back on. With that said, I didn't have access to any other ways to do it on my own via some slick ingenuity. If you have access to a loading dock you may be able to do it yourself with the help of some wood or whatever and eating some wheaties prior. :) Once one end is on the loading area if you had access to a dolly of sorts (one for each corner) that could help as well as you push the bed off the truck and into the loading area.
 

Knuckles

Junior Member
Joined
Nov 11, 2015
Posts
7
Reaction score
0
Location
Albany, NY
First Name
Joe
Truck Year
1986
Truck Model
C30
Engine Size
454
I take my hood off by myself. You're probably not going to get the bed off that way without damaging it. I use an engine hoist, comes off easy enough.

Sent from my VS990 using Tapatalk
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,413
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
I used my cherry picker to take mine off, two pieces of 2x4 across the center and it lifts right right up..
 

Knuckles

Junior Member
Joined
Nov 11, 2015
Posts
7
Reaction score
0
Location
Albany, NY
First Name
Joe
Truck Year
1986
Truck Model
C30
Engine Size
454
Yeah, I just use heavy duty ratchet straps corner to corner and one from side to side at those center stake pockets. Engine hoist pulls the ol 8' dually box right off

Sent from my VS990 using Tapatalk
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,413
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
That's a good way of doing it too..
 

jetman

Full Access Member
Joined
Dec 26, 2012
Posts
213
Reaction score
11
Location
Minnie, AK
First Name
Don
Truck Year
1980
Truck Model
c10
Engine Size
5.0
As stated an engine hoist w/ ratchet straps makes getting the bed off a simple task. (my guess is that a 8 footer weighs about 350)

I've taken off the hood by myself using the same engine hoist attached to the center of the front leading edge and two ratchet straps on the rear corners going up to the rafters of the shop. Lifted hood up then backed up truck. Should you not have an engine hoist, three straps going up to the rafters.
 

fumehappy

Junior Member
Joined
May 23, 2016
Posts
16
Reaction score
1
Location
New York
First Name
John
Truck Year
1984
Truck Model
C10
Engine Size
305 5.0L
I wish I had both an engine hoist, and rafters. I barely have headroom in the one car garage i'm using... :(
Thanks for the input though!
 

Forum statistics

Threads
44,081
Posts
949,016
Members
36,159
Latest member
KrazyKustoms
Top