Wanted Cruise Control Rod/Link

[Kilian]

Looking for the rod/link that goes from the cruise control vacuum servo to quadrajet, for mid 80s 350 sbc, appears to need to be around 8 to 8.5 inches in total length. Not sure if they made that link that long, but the approx 7 inch long link that I got at some point (not original) is too short.

 

[78C10BigTen]

I do believe that head screws farther off to extend it. I have a couple of them but im not sure where they got to...

 

[Ricko1966]

Are you wanting it for function,or to look original. I ask because if it were mine I'd have already just cut that one in 1/2 laid my 2 pieces next to a long enough piece of screen door tension rod and brazed it,or made a new one with ball chain from the hardware store.

 

[Kilian]

Just looking for it to function. I'll probably end up making something that will work but wanted to see if I could get something ready to go.

 

[Ricko1966]

It only has to pull,you could put that link on the carburetor and use a piece of wire as an extension link to the servo.