Video: 30" long X 6" round case Magnaflow

[Jims86]

Hey Guys,
Got a little bored, so I did a little video for the sound of the Magnaflow that I just installed to replace the Walker Quietflow replacement that was too loud( yeah, i know....wtf?)
At some point, I will be installing another muffler on the up side of the tail pipe, to get as stealthy quiet as possible.
The exhaust on this Truck has been totally replaced with an 87-91 Walker 3" system, and new Dorman TBI exhaust manifolds.
The engine is stock TBI, save for the comp cam 12-388-4, which required some chip tuning to get rid if the low idle surge.
The surge was caused by the lower vacuum of the cam, which surprised me, because its not much of a step up from stock TBI. Made it run pig rich at idle.
Idle speed also had to be raised for best idle also.
This Magnaflow is a pretty easy install, if you have factory 3" exhaust, just add an extra 2" length of pipe on either end, and it will clamp right up.

You must be registered for see images attach

Video: http://i144.photobucket.com/albums/r183/jameslleary/cafb8f77.mp4

 

[89Suburban]

Hey Guys,
Got a little bored, so I did a little video for the sound of the Magnaflow that I just installed to replace the Walker Quietflow replacement that was too loud( yeah, i know....wtf?)
At some point, I will be installing another muffler on the up side of the tail pipe, to get as stealthy quiet as possible.
The exhaust on this Truck has been totally replaced with an 87-91 Walker 3" system, and new Dorman TBI exhaust manifolds.
The engine is stock TBI, save for the comp cam 12-388-4, which required some chip tuning to get rid if the low idle surge.
The surge was caused by the lower vacuum of the cam, which surprised me, because its not much of a step up from stock TBI. Made it run pig rich at idle.
Idle speed also had to be raised for best idle also.
This Magnaflow is a pretty easy install, if you have factory 3" exhaust, just add an extra 2" length of pipe on either end, and it will clamp right up.

You must be registered for see images attach

Video: http://i144.photobucket.com/albums/r183/jameslleary/cafb8f77.mp4

C'mon man!!! Let's hear some commentary, let these other guys hear that sexy voice of yours!!

She looks damn good on video man, those rims are sweet!!!

 

[Jims86]

I have been pondering these Cragar Black D windows lately, limit the chrome to a nice new set of lug nuts, and center caps, and if thats not enough, I think I could find some beauty rings to snap on like this guy did.

You must be registered for see images attach

 

[Guardian]

My wheels are black and looks like a beauty ring but it is the way they are made.

 

[HotRodPC]

Damn muffler is about as long as the driveshaft. It should be quiet. I like my quiet rounds on the C20, not sure what brand they are though. Maybe even OEM.

 

[Jims86]

Damn muffler is about as long as the driveshaft. It should be quiet. I like my quiet rounds on the C20, not sure what brand they are though. Maybe even OEM.

Judging from the pics you posted way back when, they are OEM. 2-1/2" inlets, and 2" outlets. and there are longitudinal lines in the cases. Kinda what current AP mufflers look like.
This Magnaflow is just a tad quieter than the QF, length does play a big part.

 

[Driver4r]

Lol, too quite. A nice set of open headers cruising the strip is just what everyone would like to see.

 

[GreaseDog]

I have been pondering these Cragar Black D windows lately, limit the chrome to a nice new set of lug nuts, and center caps, and if thats not enough, I think I could find some beauty rings to snap on like this guy did.

You must be registered for see images attach

I love Rich's truck.... So clean!