Vent window trick?

[brooksman9]

Anyone ever try this trick I ran across in a google search? 5th post down.

Vent Window Gasket Install? - TheLincolnForum.Net

www.thelincolnforum.net

 

[JamesSam]

Anyone ever try this trick I ran across in a google search? 5th post down.

Vent Window Gasket Install? - TheLincolnForum.Net

www.thelincolnforum.net

Anyone out there tried this on a square yet!!???

 

[sidschev]

not i but im about ready to try this.... ive most all the rubbers for the 84 now.....

 

[squaredeal91]

I haven't had to do any yet but it's a very good way. No drilling out rivets.

 

[Elliot W]

This seems like a great idea. I need to replace my weatherstripping but had lost motivation after reading how big of a headache it is to do this job. Based on others' experiences, I figured I would pay the $500 to Precision to have them deal with the headache, but this gives me hope. This means I wouldn't have to take the vent window assembly out of the door correct? Are there any other difficult parts of the weatherstrip install that are a pain?

 

[brooksman9]

One of the main reasons I asked about this is because I already replaced the window channel seal on the red truck. Didn’t want to take a chance of screwing that up taking it back out. It may make a difference though if I have a two piece vent window seal. I’ll have to investigate that.

 

[Daron58]

I used the 2 piece vent window seals, I borrowed a mini rivet setting press tool from a friend, use plenty of lube non-petroleum based and take your time, it’s very doable just a little patience and you can do it. Good luck

 

[Craig Nedrow]

Anyone ever try this trick I ran across in a google search? 5th post down.

Vent Window Gasket Install? - TheLincolnForum.Net

www.thelincolnforum.net

Good find Patrick, I will keep this in mind, as I bought all that stuff, but not ready to install, waiting for warmer weather...snowing now.

 

[brooksman9]

Craig please post back what luck you may have. I’m not planning to tackle that anytime soon but thought it was a neat trick when I ran across it.

 

[Bennyt]

My 2 cents. While this is a neat trick that will work for many, and may be a temp repair to get you through until you can tear it apart....I think this is best reserved for the show vehicle that gets limited use. In the link, it was a '63 Continental and I suspect that it's not being driven much. If the seal does fail, most likely it's just a short drive home to repair. My concern is a lot of folks on here drive their trucks daily/ regularly and possibly in adverse conditions. They open and close the vent windows a lot more than the guy that only goes to shows. Be interesting how it holds up for those.

 

[brooksman9]

Anyone used these latches from Amazon?

https://www.amazon.com/gp/product/B084P328TG/

 

[squaredeal91]

Anyone used these latches from Amazon?

https://www.amazon.com/gp/product/B084P328TG/

Interesting. I wonder if there any good? Might be worth it for the new hardware at the very least. You going to be our guinea pig?

 

[brooksman9]

I guess. lol. They are the same price at LMC but $11 for shipping vs free.

 

[brooksman9]

Finally got the latches from Amazon. The snow delayed them a bit. They seem to work fine. More parts in the bag than you need or can fit in the glass. Look nice. Made in Taiwan. Better that what I had for sure. We'll see if they last.

You must be registered for see images attach

 

[Randy and Easton]

We did ours, two piece set from precision. Took a while. Took one frame apart and not the second. Both came out great. But as posted above take your time, walk away when you have to!
The refurbish at precision is a great deal as everything is included including powder coating frames which we were unable to do but they came out fine.

Randy and Easton