Turn signal question

[rwljpl]

Here is the situation:
Left turn signal works perfectly. Hit the right turn signal and the light on the dash and the signals front and back stay lit solid. If I turn on the hazards everything flashes as it should.

What’s wrong and what do I need to fix the turn signal that won’t flash?

TIA

 

[Shorty81]

You have a bad ground. Check for corrosion .

 

[78C10BigTen]

Usually if the green dash light stays solid its a burnt bulb

 

[rwljpl]

That’s the thing - my grounds look good and the bulbs all work. Any more suggestions?

 

[PrairieDrifter]

Turn signal relay, maybe? But I would bet it's a bulb problem.

 

[78C10BigTen]

Did they work correctly previous?? Maybe one bulb is in the socket in the wrong orientation also....

 

[Snoots]

Turn on your 4-ways and do a walk around. I'm guessing a bad bulb.

 

[Scotty D]

Hazard lights and turn signals are on 2 different circuits, so if the lights work correctly when the 4 ways are on, you know your bulbs are good. it may be in the turn signal switch in the column - but it does seem like a ground issue in the dash or cab to ground somewhere

 

[rwljpl]

Left turn signal stopped flashing last night. Figured it had to be the relay after that - and it was. Stopped by the auto parts store for a new relay today and that did the trick. Everything is good now. Thanks!