Todds 84 k10

[Todd newt]

Hello I am new to the forum my name is Todd Newton, I am from New Roads,La. I own a
1984 K10 that I am currently restoring , I have a question need help please. There is a switch
under the dash drivers side that is directly about the stoplight switch, its activated by the same
lever on the brake arm as the the stop switch it has a vacuum line connected to it and I think
a plug with wires, what does it do and is it needed, the switch are hose has a leak and I cannot
find it at LMC are online.

 

[1987 GMC Jimmy]

Welcome. You’re really close to me, less than two hours, which for here is close. That’s the cruise control release switch for when you press the brakes. If you want cruise, you definitely need that leak fixed. If not, then no.

 

[Todd newt]

Thanks for your help, I have done away with the cruise with new engine, so that will no longer be needed.
Just put a new built 400 SB with EFI holley terminater its making 413 HP to the ground. big differance
from the 305 stock . Thx again TN

 

[1973c10]

 

[bucket]

Howdy!

 

[shiftpro]

big differance
from the 305 stock

Oh you don't say...!
Welcome to the pack and post some pics of your truck if you can.

 

[WFO]

Welcome from the Texas Panhandle.

 

[Shorty81]

Welcome from the Buckeye State .

 

[Snoots]

Welcome from a Newton in Georgia

You must be registered for see images attach

 

[Old77]

 

[Doppleganger]

You must be registered for see images attach

 

[Dan Miller]

Welcome from Indiana !!

 

[Preston]

Welcome to GMSB from Virginia

 

[dvdswan]

Welcome to the site.