Thinking of swapping to ls

[NCTyphoonKid]

If I were to buy a wiring harness where would be a good place to get one? Psi?

 

[Old77]

@foamypirate got a super nice one. Look in his build thread or maybe he'll chime in here

 

[Old77]

Here's a link to his thread where the actual harness looks like. I'll keep searching for you to find the company that he had do the work

http://www.gmsquarebody.com/forum/showpost.php?p=296183&postcount=241

 

[Old77]

And here's the link to the company who did his harness

http://shop.bp-automotive.com/


Seriously, read through his entire thread and take notes. All of the info is in there

 

[dougbert]

I found BP Automotive sells a service on ebay for $250 for a standalone mod of customer's harness

http://www.ebay.com/itm/18197964924...38.l2649&ssPageName=STRK:MEBIDX:IT&rmvSB=true

and ditto on reading foamypirate's thread

dougbert

 

[beest]

Also theres 150tunes.com he redoes the harness, makes it a stand alone with a fuse block included for 250.

He also will reprogram your pcm for 150, then stand behind it for life, meaning free retunes for future mods(cam ect) for the life of the pcm. Just for the cost of shipping. Thats where i will be sending my harness and pcm soon.

http://www.pirate4x4.com/forum/motor-tranny-t-case-performance/924402-gm-pcm-tunes-150-life.html

Sent from my SM-G920P using Tapatalk

 

[beest]

Heres my swap in progress...

You must be registered for see images attach

 

[NCTyphoonKid]

May possibly have found a engine and trans combo out of a 03 suburban motor has 180k on it can get both for 1k with harness and accessories

 

[beest]

May possibly have found a engine and trans combo out of a 03 suburban motor has 180k on it can get both for 1k with harness and accessories

Sweet. I got my engine out of an 03 yukon. Thatll do ya fine.

Sent from my SM-G920P using Tapatalk

 

[NCTyphoonKid]

Would I be better off going ahead and getting a engine and trans that's already pulled? I found one with 131k supposedly out of a 06 Silverado. Or should I go with the 03 and pull it my self? The 03 the guy told me he thought it had 180k but the odometer was reading 248k

 

[beest]

Its not hard to pull. The 06 will probobly by drive by wire, if that matters to you. On the mileage issue 131k sounds much better than 248k. The ls engines are pretty robust though. The advantage to pulling it youself is you can get all the bits and pieces you want from the donar.

Sent from my SM-G920P using Tapatalk

 

[NCTyphoonKid]

Its not hard to pull. The 06 will probobly by drive by wire, if that matters to you. On the mileage issue 131k sounds much better than 248k. The ls engines are pretty robust though. The advantage to pulling it youself is you can get all the bits and pieces you want from the donar.

Sent from my SM-G920P using Tapatalk

The 03 is drive by wire as well but can't I change the intakes to adapt to the 02 and back cable drive? The 06 was involved in a wreck but it's already pulled out and everything they want 900 for it

 

[beest]

I believe you can swap the intake out, you will need to have the pcm programmed for that. My engine is an 03 drive by cable.

Sent from my SM-G920P using Tapatalk

 

[NCTyphoonKid]

I believe you can swap the intake out, you will need to have the pcm programmed for that. My engine is an 03 drive by cable.

Sent from my SM-G920P using Tapatalk

Oh ok I thought in 03 they went to DBW maybe not but that's not to big of a deal I don't guess

 

[beest]

There was some crossover in 03. I guess they had leftover parts. Lol

Sent from my SM-G920P using Tapatalk