Switches

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
631
Reaction score
2,306
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
Since the knowledge is vast here and it’s been saving me time, thank you all, please inform me what the purpose of the switch under the headlight switch? Also, the gauge bezel doesn’t quite match up with the headlight switch and opening, a PO did a dash hack so not sure if the headlight switch isn’t located correctly? I usually do a search first but wasn’t sure what that switch is called and I don’t see it labeled. Windshield wiper switch is on the column and it’s not a manual choke pull. Also, what could be the purpose of the red indicator?
 

Attachments

  • E67CC0E7-B35E-42A7-B6BA-A7383508B9E9.jpeg
    E67CC0E7-B35E-42A7-B6BA-A7383508B9E9.jpeg
    151.2 KB · Views: 63

rusted nuts

Full Access Member
Joined
Mar 5, 2023
Posts
809
Reaction score
1,422
Location
Pa.
First Name
Jeffrey
Truck Year
1979
Truck Model
k20
Engine Size
4cly diesel
What happens if You pull it???
 

Attachments

  • cat in winnder 001.JPG
    cat in winnder 001.JPG
    93 KB · Views: 37

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,593
Reaction score
4,721
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Looks like an add on. Probably not factory. Where do the wires go?
 

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
631
Reaction score
2,306
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
It pulls out about 1/4”, three wires are connected to the back terminals, one goes to the red indicator, the other two go into the engine cavity. The two going through the firewall and into the engine cavity are heavily black taped and feed into the covered wire loom so not easily traced without unwrapping the tape. When I pull the switch nothing happens and no light indicator either. From the factory, did the wiper switch reside where the light switch is and the light switch was in the lower opening?
 
Last edited:

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,892
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
With a truck that old, and lots of previous owners and modifications, who knows what it was for? For all you know, whatever the switch controlled might be long gone.

If you really want to know, carefully trave each wire until you find what it’s connected to. The problem with that approach is the half assed “repairs” or modifications you will more than likely find.

I HATE fixing previous owners wiring. It usually turns into a major headache.
 

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
631
Reaction score
2,306
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
Could this switch be a trans lock when this truck was an automatic rather than a manual as it is today? I’ve noticed a few threads with trans lock switch which looks similar.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,877
Reaction score
5,711
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
There's something going on with the light switch. Looks like the bezel is mismatched too. What year is the truck? That's a late 70's bezel. Which switch actually makes the lights come on?
 

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
631
Reaction score
2,306
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
1983 K20, upper switch is lights, lower unknown, the bezel is for windshield wiper on dash eventhough they are working at the column. The lower switch has three wires, two go through the firewall, one goes to the red illuminated near the switch.
 
Last edited:

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,877
Reaction score
5,711
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
1983 K20, upper switch is lights, lower unknown, the bezel is for windshield wiper on dash eventhough they are working at the column. The lower switch has three wires, two go through the firewall, one goes to the red illuminated near the switch.
Probably just a really hack way for some aftermarket lights or a bad headlight switch at some point.
 

Forum statistics

Threads
44,420
Posts
957,291
Members
36,766
Latest member
briochey
Top