Swapping to manual hubs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MMostowyk

Junior Member
Joined
Jun 29, 2018
Posts
9
Reaction score
4
Location
Rosseau, ON, Canada
First Name
Morris
Truck Year
1984
Truck Model
K20
Engine Size
5.7 L
I’m considering Warn hubs for my 84 K20. Question is- is it worth the time and money.
Truck is not a daily driver, but gets good use in summer hauling and picking up parts form my other builds. I only use 4WD if I go off road.
Pro’s - are better fuel mileage as front driveline doesn’t work as hard.
Con’s - manual intervention, installation.
What’s the verdict? Opinions and experiences appreciated.
 

Itali83

Full Access Member
Joined
Feb 7, 2015
Posts
575
Reaction score
1,079
Location
Maine
First Name
Ben
Truck Year
1982, 1987, 1987
Truck Model
K10, 'burban C10, Jimmy
Engine Size
350, 6.2, 350
If you are on the fence about it. Wait until you get stuck, put the transfer case into 4by only to find out your “auto” hubs don’t work. Then it’ll be an easy decision.

Ben
 

Curt

Full Access Member
Joined
Sep 11, 2017
Posts
676
Reaction score
1,142
Location
Loco Hills
First Name
Curt
Truck Year
1984
Truck Model
K-30
Engine Size
383
Also,auto hubs are the weak link in your 4WD system by far.
 

45acp

Member
Joined
Mar 5, 2021
Posts
45
Reaction score
24
Location
Antelope
First Name
Mark
Truck Year
1984
Truck Model
K1500
Engine Size
350
I’m considering Warn hubs for my 84 K20. Question is- is it worth the time and money.
Truck is not a daily driver, but gets good use in summer hauling and picking up parts form my other builds. I only use 4WD if I go off road.
Pro’s - are better fuel mileage as front driveline doesn’t work as hard.
Con’s - manual intervention, installation.
What’s the verdict? Opinions and experiences appreciated.
I installed warn hubs about two years ago,should have done it years ago. Like others have said the auto/hubs are a weak spot. They are easy to change over ( very clear instructions). I get better fuel mileage and performance. The only downside is you must lock them in and drive a couple of miles every month or so to keep every thing lubed (hub bearings,transfer case and front diff.).
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,239
Reaction score
1,326
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
I installed warn hubs about two years ago,should have done it years ago. Like others have said the auto/hubs are a weak spot. They are easy to change over ( very clear instructions). I get better fuel mileage and performance. The only downside is you must lock them in and drive a couple of miles every month or so to keep every thing lubed (hub bearings,transfer case and front diff.).

I think the last part of that is always good advice, even for auto hubs.

but how would manual hubs get better mileage than auto hubs?
 

MMostowyk

Junior Member
Joined
Jun 29, 2018
Posts
9
Reaction score
4
Location
Rosseau, ON, Canada
First Name
Morris
Truck Year
1984
Truck Model
K20
Engine Size
5.7 L
Thanks for your opinions. Leaning toward installing them.
 

Forum statistics

Threads
44,401
Posts
956,720
Members
36,714
Latest member
MartinK5
Top