Spicer 44 Bushing Needed

[AKguy]

My 1975 dated Dana 44 still has the Spicer 44 hubs and they are in great shape, except for one of the bushings ( item 17 ) that the inner clutch gear rides on is toast. Have been searching e-bay, etc., and have not found one. If any y’all got a line on one it would be greatly appreciated.

You must be registered for see images attach

 

[AuroraGirl]

OO I never saw a hub that looks like that. If you had the other main hub design I have an extra set but im sure thats for the other front end option.

 

[77 K20]

The Yukon hardcore hubs are based on the same design. They call them a spacer- not a bushing. They even have different thicknesses.

https://www.randysworldwide.com/wp-...-D44-Hardcore-Locking-Hubs-Install-Manual.pdf

Maybe you can just buy spacers thru them?

 

[AKguy]

The Yukon hardcore hubs are based on the same design. They call them a spacer- not a bushing. They even have different thicknesses.

https://www.randysworldwide.com/wp-...-D44-Hardcore-Locking-Hubs-Install-Manual.pdf

Maybe you can just buy spacers thru them?

Perhaps, I will reach out and see if it can work for my application. Thanks!

 

[TubeTruck]

If you can't find one pull the other one and have a machine shop make one for you, or 3 so you have spares