Some hesitation and stumble 85 k20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fender89

Junior Member
Joined
Feb 26, 2022
Posts
23
Reaction score
23
Location
Pacific Northwest
First Name
Randy
Truck Year
1985
Truck Model
k20
Engine Size
350
Truck has a holly truck avenger carb, vortex headers, emissions was deleted. Truck runs idles fine, and as long as I drive it like a grandpa it does fine. But when I get on it to accelerate hard it stumbles I also did notice a few very small back fires but those are rare.
I did find a vacuum leak on the intake manifold and took it off put new gasket it a year ago or so which seemed to help. I drove it probably a dozen times over the winter and now it's stumbling again. I don't believe it has any more vacuum leaks, if it does it would be very small. Any holly gurus here? I think it has to do with it but who knows. Any insight would be helpful. Thanks
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,938
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Possibly lean, check fuel pressure and volume, float level, accelerator pump, fuel filter, ect.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,451
Reaction score
8,698
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
What distributor do you have in it? How is it timed? Are you sure you don't have 2 plug wires crossed?
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Is the accelerator pump adjusted right? You should see fuel come from the pump shooters with the slightest movement of the throttle.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,451
Reaction score
8,698
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Truck has a holly truck avenger carb, vortex headers, emissions was deleted. Truck runs idles fine, and as long as I drive it like a grandpa it does fine. But when I get on it to accelerate hard it stumbles I also did notice a few very small back fires but those are rare.
I did find a vacuum leak on the intake manifold and took it off put new gasket it a year ago or so which seemed to help. I drove it probably a dozen times over the winter and now it's stumbling again. I don't believe it has any more vacuum leaks, if it does it would be very small. Any holly gurus here? I think it has to do with it but who knows. Any insight would be helpful. Thanks
Was this supposed to say vortec heads? Does the problem go away after the engine is hot?
 

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
472
Reaction score
702
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
HOLLEY carburetor, VORTEC heads and snow in the picture. I dont think the heads don't have a heat crossover. That could have alot to do with the problem. Sounds like it needs a good tune up as well. Just some thoughts.
 

fender89

Junior Member
Joined
Feb 26, 2022
Posts
23
Reaction score
23
Location
Pacific Northwest
First Name
Randy
Truck Year
1985
Truck Model
k20
Engine Size
350
turns out i changed my fuel filter, and retarded the timing just a touch and the hesitation is gone. i also ordered a non dial fuel pressure regulator. much appreciated on the responses
 

Forum statistics

Threads
44,168
Posts
950,803
Members
36,286
Latest member
goodwrenchca
Top