Sloppy stearing, what to look for??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

charlesg

Full Access Member
Joined
Mar 26, 2018
Posts
101
Reaction score
13
Location
wisconsin
First Name
charles
Truck Year
1991
Truck Model
k3500
Engine Size
454
Being my first square body, seems I am constantly moving the steering wheel back and forth, what should I look for to tighten this pig up?
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
Make sure are the steering linkages are tight, ie) drag link, tie rod ends, King pins and hub bearings. Then check the front shackle bushings and bolts. I found my frame bushing were shot (oval shaped). Lastly, check the rag joint. I just replaced mine (rubber was super soft) this week with a Jeep Cherokee steering shaft. Huge difference in road feel. Check on page 11 of my build tread it shows pictures and part numbers.
 

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
Make sure are the steering linkages are tight, ie) drag link, tie rod ends, King pins and hub bearings. Then check the front shackle bushings and bolts. I found my frame bushing were shot (oval shaped). Lastly, check the rag joint. I just replaced mine (rubber was super soft) this week with a Jeep Cherokee steering shaft. Huge difference in road feel. Check on page 11 of my build tread it shows pictures and part numbers.

Yes plenty can vouch for the Jeep Cherokee intermediate shaft upgrade. There's a write up on it in the steering section.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Don’t forget to check the frame at the steering box for cracks.
THIS for sure. Do this first. Have someone turn the steering wheel back and forth while you watch the steer box and make sure it's not separating from the frame or the frame is moving with the box.
 

charlesg

Full Access Member
Joined
Mar 26, 2018
Posts
101
Reaction score
13
Location
wisconsin
First Name
charles
Truck Year
1991
Truck Model
k3500
Engine Size
454
Checked it, seems the box is sloppy, do I tighten the sector shaft or get a rebuilt box?
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,194
Reaction score
8,033
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I put new poly bushings in my front suspension, swapped to an ORD HD 1.5" tie rod, ORD steering box reinforcement kit, ORD HD shackles and rebuilt the steering column- complete with new bearings. Last week I did the famous 'XJ shaft' swap. My steering is amazingly tight! In fact, I would say it's tighter than a bulls ass during fly season. Did I mention it's tight?
 

roundhouse

Full Access Member
Joined
Apr 5, 2014
Posts
669
Reaction score
527
Location
atlanta ga
First Name
justin
Truck Year
77,78,79,80 ?
Truck Model
K10
Engine Size
350
Checked it, seems the box is sloppy, do I tighten the sector shaft or get a rebuilt box?
That’s a very temporary fix

I’d get a new box from Redhead
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
7,270
Reaction score
15,875
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
Maybe my luck, but I have NOT seen any rebuilt boxes that were much better than the ones I replaced. I'm with Roundhouse go Redhead
 

Forum statistics

Threads
44,173
Posts
950,832
Members
36,287
Latest member
goodwrenchca
Top