Sat TOO Long

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

t0n3s

Junior Member
Joined
Jun 3, 2014
Posts
3
Reaction score
2
Location
Los Angeles
First Name
Tony
Truck Year
1987
Truck Model
C10
Engine Size
5.7
Hey all,
New here. I’ve owned my C10 for 8yrs. Drove her for 5 before I got my Jeep. She’s been sitting for the last 3 and I’m finally trying to get her going.

Problem I’m facing now is she won’t stay on. Swapped out plugs and wires and rebuilt the TBI. She starts but won’t stay on if I don’t give it gas; doesn’t idle. Any suggestions to troubleshoot before I give up and take her to a professional?
 

Knight84

Full Access Member
Joined
Feb 15, 2021
Posts
143
Reaction score
447
Location
Alabama
First Name
Alan
Truck Year
1984
Truck Model
C20
Engine Size
454
Tbi has a maf right? I'd check and clean that and the change the fuel filter. My brother's Ford fusion did the same thing. Crank and run if you gave it gas but would die as soon as the gas was let up. His was a clogged up MAF and a bad purge valve. I'd lean towards yours being an airflow issue. If it cranks you have spark, and it's getting gas when you put the pedal down, so check for fuel. That leaves air. I'd look there first.
 

hunters628

Full Access Member
Joined
Sep 10, 2019
Posts
237
Reaction score
203
Location
Ellensburg Washington
First Name
Hunter
Truck Year
1982
Truck Model
K10
Engine Size
305
Hey all,
New here. I’ve owned my C10 for 8yrs. Drove her for 5 before I got my Jeep. She’s been sitting for the last 3 and I’m finally trying to get her going.

Problem I’m facing now is she won’t stay on. Swapped out plugs and wires and rebuilt the TBI. She starts but won’t stay on if I don’t give it gas; doesn’t idle. Any suggestions to troubleshoot before I give up and take her to a professional?
Could also be a bad fuel pump or plugged filters
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,611
Reaction score
28,838
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Does it have fresh gas in it?

If you barely hold the throttle, does it stay running? If so, it probably just needs the base idle adjusted and clean the Idle Air Control solenoid. But if it's still the old gas, it can cause the issue you are having
 

Nasty-LSX

TogetherforeverCovid19
Joined
Nov 22, 2014
Posts
1,395
Reaction score
1,739
Location
HOUSTON TX
First Name
Mi Hung Lo
Truck Year
85/86/87
Truck Model
c10/k10/k20
Engine Size
LSX
Check fuel pressure. With a gauge.
 

gotyourgoat

Full Access Member
Joined
Mar 27, 2014
Posts
2,117
Reaction score
3,418
Location
NRV Virginia
First Name
gotyourgoat
Truck Year
1984
Truck Model
c10
Engine Size
smokin' 305
Normally I'd say drive it to the gas station, fill up and drive around in varying conditions, find a few on ramps and give her a few rips. When empty fill up with fresh and change the fuel filter. Since it's sat for 3 years it probably isn't tagged so a splash of fresh gas and you sitting in the driveway letting it idle and varying the revs from time to time until the tank is empty then some fresh gas and maybe a filter.

While running it in the driveway it may help bring to light other issues it has obtained from sitting.;)

And welcome!
 

t0n3s

Junior Member
Joined
Jun 3, 2014
Posts
3
Reaction score
2
Location
Los Angeles
First Name
Tony
Truck Year
1987
Truck Model
C10
Engine Size
5.7
Thx all for the suggestions! it was the MAP sensor... replaced and good to go.

However I'll take everyone's comments and to some fine tuning to get her right.

Appreciate all the responses, I'll be back! I have a 65 next that I'm rebuilding.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
Fill with fresh gas put in an addative of your choice and do an i-talion tune up and then drive it like you stole it for a tank.
 

t0n3s

Junior Member
Joined
Jun 3, 2014
Posts
3
Reaction score
2
Location
Los Angeles
First Name
Tony
Truck Year
1987
Truck Model
C10
Engine Size
5.7
Update:
So she’s a running and I can drive her a few miles to O’Reillys or gas station. But I’m concerned with the fact at times RPI gets up there before she shifts. At times, I jus take my foot off a little to let her.

Anything I can do to check and or adjust this?

Hoping I don’t need a new tranny?!
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,464
Reaction score
5,630
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Update:
So she’s a running and I can drive her a few miles to O’Reillys or gas station. But I’m concerned with the fact at times RPI gets up there before she shifts. At times, I jus take my foot off a little to let her.

Anything I can do to check and or adjust this?

Hoping I don’t need a new tranny?!

It's probably a 700R4... make sure the TV cable is properly adjusted: https://static.summitracing.com/global/images/instructions/700r4 cable adjustment instructions.pdf

I'd also change the fluid and filter before I drive it around if its been sitting for three years.
 

Latest posts

Forum statistics

Threads
44,411
Posts
956,917
Members
36,731
Latest member
LucHiscox98
Top