Rough and shaking 350 after changing spark plugs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
Hello,

this is my first post here.

i own a 1986 c20 350 in pretty neat condition, i did a lot of rework on the truck this winter (spark plugs, engine-, axle-, and trans fluid change, all filters, new power steering pump) and took the truck out for a testride last week, first 30 miles went perfect.

this weekend i was driving again after about 20 miles it startet to run rough at P and even worse in D, when accelerating you can feel that something is wrong like not all 8 are firering correctly. Also when driving at constant speed you feel a constant rythmic failure of the engine.

anyone knows a possible solution?
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
Check to make sure you didn't have a plug wire pop off. I've had them back off on a spark plug or on the distributor end before. :shrug:
 

Trucksareforwork

Full Access Member
Joined
Feb 22, 2022
Posts
245
Reaction score
475
Location
Spartanburg SC
First Name
Geoff
Truck Year
1985
Truck Model
C10
Engine Size
305
Make sure you didn't knock a vacuum fitting loose somewhere. If it's a stock '86, you also might have cracked one of the plastic lines which are pretty brittle at this age. Your symptoms sound like a vacuum leak or plug wire issue.
 

ChevyBlood

Junior Member
Joined
Apr 1, 2023
Posts
1
Reaction score
7
Location
Cape Coral
First Name
Ted
Truck Year
1977
Truck Model
C10
Engine Size
250ci
Check all of you spark plugs very close , I recently did a tune on my corvette that just like what you are saying and after it driving me crazy rechecking everything it turned out to be a sparkplug was broken the porcelain inside of the metal housing where the electrode is was broken couldn't tell by looking at it just when it finally discinagrated enough to come apart, it was a ACplug
 

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
thank you for the input so far guys, will check them on thursday when i have a day off... thankfully its not the daily driver car...

i just need to figure out where those vacuum things are.... got quite some knowledge on engines but its basically European cars and Mustangs :hmm:
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
Ugh. I didn't see you had a 1986. I had one and there are plastic vacuum lines everywhere like what Geoff said. My dad back then had a 1987 and it was way simpler!

I found a vacuum diagram: it is for a 305 but think it is the same? Might be of some help. Before poking around at each one can try starting it and spraying them down with carb cleaner and see if your engine idle changes (a change in the engine idling means the carb cleaner was sucked into the engine there from a vacuum leak)


You must be registered for see images attach
 

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
Poped the hood and checked the lines starting from the canister and immediately saw this.... hopefully this is the reason for the rough engine
You must be registered for see images attach
You must be registered for see images attach
 

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
by the way, anyone here who can tell my what that thing is for? saw that there is a cable attached on it which was loose, i think wasn't pinned in for a long time because its quite dirty in there
You must be registered for see images attach
 

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
UPDATE: Reattached the vacuum line, fired it up and ran great after a few miles when the engine starts to get warm the problem comes back......
i read somewhere that the sparkplug gap for my truck should be 0.045... is it possible that the gap causing that problem because i looked at the plugs in the cataloge and found out that the installed sparkplugs are 0.035
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,901
Reaction score
18,814
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Old points style distributor = .035.
HEI distributor =.045.
Some people set theirs at .060. Don't ask me why. Whatever gives you a very light tan on the plugs is good.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
How is your distributer cap looking? Terminals on the inside look good? Rotor look good? A lot of carbon?
Or if you pull the coil pack up inspect the rubber washer and the carbon button. I've heard stories that the high resistance versions of these can get very got and can cause failures. Aftermarket companies make a low resistance version.
 

Dave15

Junior Member
Joined
May 22, 2023
Posts
25
Reaction score
56
Location
Austria
First Name
David
Truck Year
1986
Truck Model
C20
Engine Size
350
will check the gaps tomorrow also the distributer, don't know when this has been changed last time since the truck got out of the USA 2019 and was brought to a barn in Germany for 3 years until i imported it to Austria. thiking of ordering a new cap and new wires from rockauto anyway.
how can i identity if its a HEI or not?
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
If it is newer than a 1975 HEI became the standard.

Try to find a cap and rotor that uses brass contacts vs the cheaper aluminum ones.

You must be registered for see images attach
 

rusted nuts

Full Access Member
Joined
Mar 5, 2023
Posts
809
Reaction score
1,422
Location
Pa.
First Name
Jeffrey
Truck Year
1979
Truck Model
k20
Engine Size
4cly diesel
UPDATE: Reattached the vacuum line, fired it up and ran great after a few miles when the engine starts to get warm the problem comes back......
i read somewhere that the sparkplug gap for my truck should be 0.045... is it possible that the gap causing that problem because i looked at the plugs in the cataloge and found out that the installed sparkplugs are 0.035
Not plugs
 

Latest posts

Forum statistics

Threads
44,439
Posts
958,017
Members
36,810
Latest member
ProMod
Top