Mango
Full Access Member
- Joined
- Dec 22, 2021
- Posts
- 216
- Reaction score
- 165
- Location
- JacksonWyoming
- First Name
- Gil
- Truck Year
- 1989
- Truck Model
- 1500
- Engine Size
- 350
Sounds Good! Also can i blow the coolant out of the Manifold with Air ?
Replacing intake manifold+gaskets
- Thread starter BabyBlueChevrolet
- Start date
-
- Tags
- gaskets intake manifold
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,439
- Reaction score
- 5,581
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
You will need to drain the coolant out before you start this. Once drained form the radiator, you should have almost nothing left in the manifold anywhere to need to "blow out"
squaredeal91
Full Access Member
- Joined
- Mar 10, 2023
- Posts
- 2,534
- Reaction score
- 4,583
- Location
- Cave junction Oregon
- First Name
- Greg bush
- Truck Year
- 1991 SB
- Truck Model
- K30
- Engine Size
- 5.9 Cummins 12 valve
I always just change oil after intake job to be sure. There's always something that falls through.
Mango
Full Access Member
- Joined
- Dec 22, 2021
- Posts
- 216
- Reaction score
- 165
- Location
- JacksonWyoming
- First Name
- Gil
- Truck Year
- 1989
- Truck Model
- 1500
- Engine Size
- 350
Well its Time to replace the intake Manifold Gasket Oil sample came back after a recent oil change,Potassium was holding arround 13 now spiked to 49!
Cylinder at top dead center on compression stroke before pulling Distributer out? Any other Tips would be great first time attempting this, Concerns break a bolt! Re installing the distributar and lining up with the oil Pump!
I have a Shop and three days to pull it off
Change oil after completion how about the filter ?
Cylinder at top dead center on compression stroke before pulling Distributer out? Any other Tips would be great first time attempting this, Concerns break a bolt! Re installing the distributar and lining up with the oil Pump!
I have a Shop and three days to pull it off
Change oil after completion how about the filter ?
Last edited:
