Replacement panels quality

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mike M

Junior Member
Joined
Apr 21, 2019
Posts
1
Reaction score
0
Location
jeffersonville, in 47130
First Name
Mike
Truck Year
1984
Truck Model
C10
Engine Size
250
Sorry if this has been covered, kinda new here... I am looking for a Square Body to use as a hauling truck / restoration in progress. In my area (Louisville,KY metro) it is just about impossible to find trucks without the usual rust problems. I have a line on a truck, but it will need rockers, floors, bedsides. What brand of replacement body parts or vendor/website do you recommend ? Don't post "go to a junkyard" or "look for good used"--I've looked for used items locally, really nothing on Craigslist or Facebook Marketplace that isn't already smashed or rusted. The trucks in the local junkyards have been picked clean and squarebodies are getting a bit hard to find in the local yards. Thanks in advace for your thoughts and what parts have worked for your restoration.
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
913
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,075
Reaction score
1,371
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
For the extent of the parts have you checked out copart? You may be able to find a donor near you that would cut a lot of cost.

But if you are dead set on aftermarket I haven't tried anything on a square but Keystone used to have some pretty well fitting aftermarket body panels for 90s 00s vehicles.
 

MylesNT

Local Info Bum
Joined
Jun 22, 2013
Posts
145
Reaction score
43
Location
Alabama
First Name
Myles
Truck Year
1978
Truck Model
K10 Scottsdale
Engine Size
350
LMC has the new Premium front fenders.

From the description "Premium parts are produced using 18 gauge, OE quality steel for strength and durability to outperform current collision damage quality parts."

At $200 each they are more expensive than the others, but we need a guinea pig.
 

trukman1

Full Access Member
Joined
Apr 20, 2018
Posts
340
Reaction score
138
Location
USA
First Name
Gary
Truck Year
1988
Truck Model
K5 Blazer
Engine Size
5.7 L (350)
I went with Key Parts from FixMyRust. All the body guys I talked to each said they fit the best and were the correct thickness and steel. They told me, to a man, they cut down the time they had to spend making panels fit which lowered their estimates when I agreed to buy the parts made by Key Parts. YMMV.
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,346
Reaction score
1,949
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
Stay away from the cheap stuff, it took me ages to fit the crap parts and it's still far of the original gaps and fitment.
6 years ago no premium stuff was available.
 

Johnny Mac

Junior Member
Joined
Aug 14, 2019
Posts
22
Reaction score
23
Location
Ohio
First Name
Johnny
Truck Year
1986
Truck Model
K10
Engine Size
383
So out of Goodmark, Sherman Parts, Auto Metal Direct (AMD) (easily accessible through summit...) what is thought of as decent quality panels?

OR is Key parts thought of as the best avail?

I'm in OH....quality OE or NOS panels are not easily had, and the ones that are are quadruple price of what Goodmarks go for.
 

kenn

Full Access Member
Joined
Jan 17, 2019
Posts
141
Reaction score
46
Location
detroit
First Name
ken
Truck Year
1977, 1978
Truck Model
c10, k10
Engine Size
350
plus 1 on fixmyrust, heard they are better than most. I got mine from LMC and they sucked thin steel, fit was crap and to beat it all not cheap in price at all
 

Remo76C15

Full Access Member
Joined
Feb 12, 2019
Posts
52
Reaction score
7
Location
Colorado Springs
First Name
Greg
Truck Year
1976
Truck Model
C15
Engine Size
350
Amazon has some square body panels as well. Shipping was way cheaper than LMC as well.
 

Papa John

Member
Joined
Sep 18, 2019
Posts
32
Reaction score
2
Location
Valdosta, Ga
First Name
John
Truck Year
1982
Truck Model
C10
Engine Size
305
What about usa1industries ,has anyone tried them ? They boost about there quality compared to others.As you can see I need to replace the whole left side. Semi driver fell asleep at the wheel and side swiped the truck.

You must be registered for see images attach
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
7,351
Reaction score
16,088
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
That's not really too bad for gettin whacked by a semi, seems like it coulda been a lot worse!!
 

Papa John

Member
Joined
Sep 18, 2019
Posts
32
Reaction score
2
Location
Valdosta, Ga
First Name
John
Truck Year
1982
Truck Model
C10
Engine Size
305
I looked on fixmyrust they dont have full door or full bed panels for a 82 fleet side.I emailed them cause in the pictures there is a part number but not in the list.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
I used AMD for most of the replacement panels on my k5.
Inner and outer rockers, kick panels and front floor panels.
Used goodmark for the rear floor section just behind the front seats.
No complaints on the panels.
Good quality. Of course they all need a little massaging to fit. You can see the work on my k5 build thread.
 

Latest posts

Forum statistics

Threads
44,411
Posts
956,919
Members
36,732
Latest member
blackmfcowboy
Top