Rebuilt Cardone Crap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

custodian

Full Access Member
Joined
Apr 15, 2016
Posts
959
Reaction score
556
Location
Catawba
First Name
William
Truck Year
1973, 1985
Truck Model
C10
Engine Size
5.3 LS, 350
I switched from hydoboost to vacuum boost. I bought a combination master cylinder and booster that was rebuilt by Cardone. CRAP. The master cylinder leaks between the booster and the master cylinder. The vacuum boost is bad.

After I bleed the new brakes, front and back, I checked the brakes and they got hard to push. I then started the motor and when I pushed on the brakes, they went almost to the floor, the engine speed when I pushed on the brakes and the brake light came on.

Any thoughts?
 

Poppy 87

Full Access Member
Joined
Oct 19, 2019
Posts
1,081
Reaction score
1,942
Location
Bloomingdale GA
First Name
John
Truck Year
1987
Truck Model
R10 Silverado
Engine Size
305
If the master cylinder leaks between master and booster, the booster is probably compromised. The master is leaking as well. I would return all of the parts. Pedal going to floor is internal seal in master cylinder if there are no external fluid leaks.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,854
Reaction score
5,646
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
Cardone has been dogshit for at least ten years now.
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
I had an issue recently when replacing the hydro-boost unit in my truck. Luckily it turned out the box was mismarked.

During my research though, I found out that A-1 Cardone is the one that rebuilds almost all of the units for the parts houses. Unless you buy new parts, you may be stuck with A-1 Cardone parts no matter where you go.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,976
Reaction score
12,226
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Car Done and Dork man. (Dorman)
Parts absolutely suck in recent years unless you can get OE or quality new aftermarket, which seem to be like finding hens teeth.
As much as I’d like to think I’m being old and bitchy about it, the quality is just ******.
As evidenced by 3 hydro pumps on my Dodge truck in about 20k miles, several years ago. 1 high priced OE new pump. Been good for 3x those miles and should go 5x more.
Or 4 alternators in the Tahoe to get a good one last year. Sons alt in his Mustang burned a diode and I refused to get a re-man. Took it to a shop for an actual rebuild....
 

jake wells

Can i be me?
Joined
Jul 31, 2010
Posts
2,133
Reaction score
2,486
Location
Brownsville Kentucky
First Name
jake
Truck Year
1975
Truck Model
custom deluxe 10
Engine Size
350
Ac delco parts are pricey but that is what i try to use and standard brand parts are just OK.
House brand brake parts and components are better than any cardone or dorman junk.
A dorman oil cooler set cost my friend his engine in his blazer.
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,302
Reaction score
1,853
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
I had no problems with raybestos and ac delco parts brake parts so far. I try to get new parts and not rebuild ones if possible. It's more $ but less worries.
 

Rhett Croley

Junior Member
Joined
Feb 25, 2020
Posts
20
Reaction score
41
Location
Augusta, GA
First Name
Rhett
Truck Year
1990
Truck Model
K5
Engine Size
496
I recently was forced to go hydroboost to get the clearance needed to get BBC head covers off because the stock vacuum booster was too close. I knew it's be a problem one day and the wife was looking to buy me something for my birthday so I got the parts. Wish I'd never done it. It stops great but it stopped well with vacuum breaks also, disc front/rear. It really gave me a fit because I'd power bleed the 4 calipers and they would not work. Soft, to the floor feel like you described. Tried different MC, same problem. Ran 3/16" tube to the rear discs per Wilwood, still no brakes. Turned out the linkage was just slightly long and the brake valve was just slightly open at all times so the pump mechanism could not get seal to pump. Spacers between MC and HB solved the problem, 1 set of washers to be specific, not much at all. Still don't like the HBrakes versus vacuums. They have a lot more power but I don't like the hard feel, particularly when you feather them at low rpm. Hopefully I'll get used to it.
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,775
Reaction score
1,004
Location
North Texas
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
For sure! A1 Cardone stuff is second rate at best. Rebuilt AC/Delco parts are significantly better, even if it's rebuilt in Mexico. The rebuilt alternator on my old 69 C10 is still working great after nearly 20 years!

If you've got an O'Reilly Auto Parts nearby, whatever brand they sell is backed by a lifetime warranty, so they are certainly worth a try. My 82 C10 has their store brand alternator, power steering pump, and aluminum radiator, all of which have been working fine since 2015. But if one ever fails, I just drive a few miles and get a warranty replacement.

Someone above mentioned brakes, so I'll add that I love Wagner and Raybestos brake parts. My favorite pads are Wagner semi-metallic. They probably wear the rotor more, but unless you put 15K per year n your truck, who cares?
 
Last edited:

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,045
Reaction score
15,338
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
For sure! A1 Cardone stuff is second rate at best. Rebuilt AC/Delco is significantly better, even if it's rebuilt in Mexico. The rebuilt alternator on my old 69 C10 is still working great after approximately 20 years!

If you've got an O'Reilly Auto Parts nearby, whatever brand they sell is backed by a lifetime warranty, so they are certainly worth a try. My 82 C10 has their store brand alternator, power steering pump, and aluminum radiator, all of which have been working fine since 2015. But if one ever fails, I just drive a few miles and get a warranty replacement.

Someone above mentioned brakes, so I'll add that I love Wagner and Raybestos brake parts. My favorite pads are Wagner semi-metallic. They probably wear the rotor more, but unless you put 15K per year n your truck, who cares?


I stick with oreilly for this reason, easy to get stuff warrantied out
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
1,001
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
Everyone,

Yeah, I've also noticed Cardon has gone down hill here lately. Many years ago when my wife had her '77 Buick century Special 231 V6, that car was a copy of nearly every part on my '74 C10. The only difference was the distributor was on the front of the engine, but it was still like a 350 with the two back cylinders cut off. It took the exact same brakes as my truck, i.e. 10 1/2" disc's in the front, 11" drums in the rear, TH350 trans., same oil filter, same plugs, and a bunch of other stuff. Wonderful car built for speed, fastback, two door, HEI ignition, mine had regular points though. Dead simple to work on, nothing ever went out. The absolute best car we ever owned and I'd love to have that car back. There is so much speed parts for those 231's these days it's not funny. You can pump 400 horses out of that V6 with no machine work, just bolt on's.

ANYWAY, I was using everybody back in those days, Auto Zone, Pep Boys, and a boat load of local parts places. So I go to Auto Zone to get a water pump for it, the first part to go bad in ten years. Go home and put it on, and we were having a particularly cold winter for Louisiana and the temp was 15 degrees. I manage to get the pump on while running in and out of the house to warm up. The next day my wife comes home from work and I'll be damn the pump is leaking from the weep hole like the seal had failed. I take it back, get another one, come home, put it on and that day it was 12 degrees!!

So I ask around about Auto Zone's parts and a guy gives me a copy of a newspaper article about Auto Zone was under indictment for selling counterfeit car parts. The FBI, and Custom's Dept. had busted two warehouses in China that were full of thousands of Ford, Chrysler, Chevy factory parts in factory boxes that looked just like the real thing headed for Auto Zone, but all of them were cheap pieces of junk.
So from that time on I have never bought another part from Auto Zone. I'll buy fluids and stuff like that from them but no parts. These days I buy mostly from O'Reily's, Advance Auto Parts, and a lot off the internet. I have got some of the best parts off the internet, Ebay. You look up in the upper right corner for the seller's i.d. and it shows how many sales they've had and if it's in the thousands they're good. And it'll show the satisfaction in percent, i.e., 98%. They can't afford to sell bad parts. They make tons of dollars off of Ebay if they are a good seller.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,753
Reaction score
18,205
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
I recently was forced to go hydroboost to get the clearance needed to get BBC head covers off because the stock vacuum booster was too close. I knew it's be a problem one day and the wife was looking to buy me something for my birthday so I got the parts. Wish I'd never done it. It stops great but it stopped well with vacuum breaks also, disc front/rear. It really gave me a fit because I'd power bleed the 4 calipers and they would not work. Soft, to the floor feel like you described. Tried different MC, same problem. Ran 3/16" tube to the rear discs per Wilwood, still no brakes. Turned out the linkage was just slightly long and the brake valve was just slightly open at all times so the pump mechanism could not get seal to pump. Spacers between MC and HB solved the problem, 1 set of washers to be specific, not much at all. Still don't like the HBrakes versus vacuums. They have a lot more power but I don't like the hard feel, particularly when you feather them at low rpm. Hopefully I'll get used to it.

Not part related but, you do know that you need a different length MC pushrod that's mounted at a different position on the brake pedal for HB don't you?
 

HOTFOOT

Full Access Member
Joined
Feb 29, 2020
Posts
474
Reaction score
1,041
Location
northwest ct
First Name
michael
Truck Year
1980
Truck Model
gmc k3500 srw
Engine Size
400
Not part related but, you do know that you need a different length MC pushrod that's mounted at a different position on the brake pedal for HB don't you?
what he said^^^^^^ different pedals
 

Forum statistics

Threads
44,169
Posts
950,808
Members
36,286
Latest member
goodwrenchca
Top