Rear diff making a popping noise

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Steven

Junior Member
Joined
Jul 24, 2016
Posts
11
Reaction score
0
Location
Indiana
First Name
Steven
Truck Year
1987
Truck Model
v10
Engine Size
5.7
Had a problem with this for a little while. Just replaced the pinion seal and housing gasket to stop a leak (Thought the noise was from low fluid levels) gotten a lot better after that, but now when making turns there's a pop that vibrates the whole truck. Can feel it in the cab. The harder the turn the worse the pop gets. Pops forward and backward. Seems worse in reverse though. Lot louder and just noticeable to me. Wheel bearings have almost no slack. Same with pinion bearing.
 

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
No idea but curious. My 68 Camaro used to do the same, trying to get educated on front/rear ends.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
So you just had the cover off? Did you notice if there was a locker in there? If it's open rear end, it might be close losing the spider gears and/or grenading the carrier.
 

throttle out

Full Access Member
Joined
Sep 10, 2015
Posts
98
Reaction score
56
Location
Michigan
First Name
Sam
Truck Year
1987
Truck Model
V10
Engine Size
5.3 LS
My 12 bolt in my 87 4x4 does this as well. Kinda feels like the locker isn't fully disengaging but the tires don't chirp.
 

Steven

Junior Member
Joined
Jul 24, 2016
Posts
11
Reaction score
0
Location
Indiana
First Name
Steven
Truck Year
1987
Truck Model
v10
Engine Size
5.7
Im pretty sure its a limited slip. Dont really know much about them. 1 thing I did notice was the rod that holds the clips for the axles. when just turning one wheel there would be a point where it would pull itself in just a hair then pop back out. Only does so when turning one wheel. Turned both and never saw it happen. This is the first time I've ever had trouble with it. All the gears seem pretty good too. No metal shavings or teeth missing from what I saw. All the springs looked intact too
 

donnieray

Talks to dogs and trucks.
Joined
Oct 23, 2014
Posts
619
Reaction score
517
Location
Roanoke Rapids NC
First Name
Donnie
Truck Year
84,85,86.
Truck Model
86 C10, 84 K10 MM7 NP833 option truck, 85 K10.
Engine Size
350,355;350.
If it has a limited slip unit installed the wrong gear oil will make it pop, chatter and vibrate when turning. At least mine will. I have an Eaton unit in my 12 bolt rear. new synthetic gear oil brought all the noises after changing. I refilled it with dino oil and limited slip additive and all the snaps and pops went away.
 

Steven

Junior Member
Joined
Jul 24, 2016
Posts
11
Reaction score
0
Location
Indiana
First Name
Steven
Truck Year
1987
Truck Model
v10
Engine Size
5.7
I'm assuming that's the same thing that was wrong with mine too. It is a LSD and I used to just fill it with the autozone 80-90 gear oil without anything else. I put 64 ounces of the Lucas Oil LSD oil in it then topped it off with the autozone crap and it seems to have went away. Never would have thought the wrong oil would make it do that.
 

throttle out

Full Access Member
Joined
Sep 10, 2015
Posts
98
Reaction score
56
Location
Michigan
First Name
Sam
Truck Year
1987
Truck Model
V10
Engine Size
5.3 LS
interesting.
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
if you are running a limited slip with clutches you need the additive some of the synthetics will work without the additive. read the label. highdesertranger
 

Latest posts

Forum statistics

Threads
44,157
Posts
950,588
Members
36,271
Latest member
jstewart7501
Top