Rear camera installation

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jakewalter

Junior Member
Joined
Aug 23, 2023
Posts
3
Reaction score
4
Location
Northern Michigan
First Name
Jake
Truck Year
1985
Truck Model
K20
Engine Size
454
I am in the process of installing a rear camera for my truck camper.

I am working on my 85 K20 with an automatic transmission.

I need to tap into the backup lights.

Rather than run a wire back to the taillight I was wondering if I could tap into the wiring underneath the dash.

If anyone knows where the wires are I would appreciate the help.

Thanks so much,
Jake
 

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
136
Reaction score
142
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
I am in the process of installing a rear camera for my truck camper.

I am working on my 85 K20 with an automatic transmission.

I need to tap into the backup lights.

Rather than run a wire back to the taillight I was wondering if I could tap into the wiring underneath the dash.

If anyone knows where the wires are I would appreciate the help.

Thanks so much,
Jake

I am not sure that wiring will be under the dash since nothing in the cab actually depends on it - my understanding is there is constant +12 going to the switch on the transmission (which closes when you move the selector to "R") and then from there it goes right to the reversing lamps. The closest point to grab that signal might be at the transmission itself.
 

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
562
Reaction score
704
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
My rear camera needed one power supply when the vehicle is on and one signal (reverse light) to turn it on. Is your setup similar?
 

Scott91370

Full Access Member
Joined
Apr 2, 2018
Posts
983
Reaction score
1,002
Location
Burleson, Tx
First Name
Scott
Truck Year
1985
Truck Model
Sierra1500
Engine Size
350
If you can't find it put in a switch that you can use to turn it on anytime you want.

Flip switch, camera comes on.
Put truck in reverse and back up.
Turn switch off.
Put truck in drive and drive off.
 
Last edited:

Steelbuddha

Junior Member
Joined
Mar 16, 2024
Posts
13
Reaction score
13
Location
Central North Carolina
First Name
Jonathan
Truck Year
1984
Truck Model
K20 (dump bed)
Engine Size
350
If you can't find it put in a switch that you can use to turn it on anytime you want.

Flip switch, camera comes on.
Put truck in reverse and back up.
Turn switch off.
Put truck in drive and drive off.
Yep -- the screen for my camera has an on/off switch on the face of it.
 

plumtruckerd

Junior Member
Joined
Jul 30, 2023
Posts
20
Reaction score
33
Location
Pittsburgh
First Name
Mike
Truck Year
1986
Truck Model
C3500
Engine Size
5.7
I have a dump truck that has small side mirrors. I installed a camera that the screen is a rearview mirror. It was able to be set to stay on any time the truck is on. It did connect to the backup lights, but that just turns on the lines to help with parking. It works great, but can give you a little motion sickness if you watch it too long going down the road. It has ad HD display that is so clear.
 

Terry Wilkerson

Full Access Member
Joined
Dec 2, 2021
Posts
503
Reaction score
676
Location
Kansas
First Name
Terry
Truck Year
1986
Truck Model
GMC 1500
Engine Size
350
I have a back up camera on a choptop sled. I have it powered with the ignition on all the time. You should have open ignition slots on the fuse block to pick up ignition power. Like yours mine has a switch on the unit if I want it off.
 

jakewalter

Junior Member
Joined
Aug 23, 2023
Posts
3
Reaction score
4
Location
Northern Michigan
First Name
Jake
Truck Year
1985
Truck Model
K20
Engine Size
454
I’m sorry for not getting back to this sooner.

My wife and I went on a camping trip in the upper peninsula of Michigan and had transmission problems.

We had to leave the camper up there at a friends house so it will be a while until I get back to the rear camera.

Thank all of you for your insight and advice.

It is really appreciated.
 

Muddybuddy

Full Access Member
Joined
Jul 2, 2021
Posts
56
Reaction score
55
Location
VA
First Name
James
Truck Year
87
Truck Model
K5
Engine Size
350
Those of you that have them and like them, can you share which ones you have? Been wanting to do this for k5 and crewcab
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,113
Reaction score
9,244
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Thank God I was put to sleep for that and don't remember it, and even better it was all good news. So I was told I wouldn't need a camera in my rear again for 8 more years.

DOH !!! Ohh Wait !!!

Uhh so yeah. I just bought a back up cam for my roll back. 1 hot wire, which I'm taking from the tail light for the camera, ground to chassis through the mounting bracket, then the screen just plugs into a cig lighter which I'm just going to wire hot to the IGN side of a fuse. The Camera and 1080P 7in screen communicate wireless through these little antennas. That's it. Fairly easy. Now I just need to do it. $88 from Amazon. Looks like it's $109 now with the $30 coupon. I just got it this week, so it went up quick. Well it was Prime 2 day sale now that I recall. https://www.amazon.com/dp/B0773HXB23/ <<<<< LINK
 

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
136
Reaction score
142
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
Those of you that have them and like them, can you share which ones you have? Been wanting to do this for k5 and crewcab

I got one of the folks here at work to order me the Wolfbox setup that has the in-mirror front facing camera and a small backup camera. I use it in my 1989 Suburban that has the ambulance-style doors with just 2 small square windows you can't see much out of. I mounted the backup camera on a bracket at the top inside edge of the passenger-side rear door window; angled downward. I can't quite see the bumper of the Surburban from that angle but even the door handle is clearly visible. It lets me see things close to the rear of the vehicle, objects further back can be seen regular side mirrors but I can see if there is an object or person or animal that would be hidden from the normal mirrors otherwise.

The head unit just goes over the normal inside rear-view and its display is reflective enough that it could work as a mirror when off. It has the option to switch to full width rear camera view if wired to the backup light circuit, but it also has the ability to show the forward facing and rear facing in a side-by-side configuration which works better for me. It records both cameras to an onboard mircro-SD and has a GPS receiver that keeps the time-stamp accurate and also shows speed and direction on the front-facing image - very useful in a 35 year old squarebody which has a speedo that is always around 5-10 mph off.
 

Latest posts

Forum statistics

Threads
43,811
Posts
943,824
Members
35,812
Latest member
Byvion
Top