Rear Brake Line Bracket

[Doppleganger]

Got the brake line bracket.

Hoping to get a right side rear exhaust bracket to go with. This is on the right rear just behind the rear diff.....4WD version.

I'd take a new one if anyone made them.

THX

 

[PrairieDrifter]

I have acquired a couple more trucks and a frame. All c30's though. I think I've got a right rear exhaust hanger. I can get a better picture early next week.

You must be registered for see images attach

 

[AyWoSch Motors]

Need this bracket if anyone has one or is scraping out a frame. Yep - its riveted. Never did find the right side rear exhaust bracket either. This is on the right rear just behind the rear diff.....4WD version.

I'd take a new one if anyone made them.

THX

You must be registered for see images attach

I forgot about the exhaust hanger.
I just picked up a K20, probabaly has both. Ill look tomorrow

 

[Craig 85]

I have the brake line bracket. PM your address and I'll get it out to you.

I thought I'd throw this out there since you have an '85. Unless you are building new lines or using a prior year design that doesn't have the weight sensing proportioning valve, here how I did my '85 K30 without the valve. I did have to remove one of the existing line holders.

FYI at some point I will be removing the factory exhaust hangers from my truck. I just done know if they are longer than a K20 version.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Doppleganger]

I have the brake line bracket. PM your address and I'll get it out to you.

I thought I'd throw this out there since you have an '85. Unless you are building new lines or using a prior year design that doesn't have the weight sensing proportioning valve, here how I did my '85 K30 without the valve. I did have to remove one of the existing line holders.

FYI at some point I will be removing the factory exhaust hangers from my truck. I just done know if they are longer than a K20 version.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I should measure mine and see.

Thx.

 

[Doppleganger]

Got the brake line bracket....now just need the right rear exhaust bracket.

 

[AyWoSch Motors]

Got the brake line bracket....now just need the right rear exhaust bracket.

What exactly does it look like again. I looked at my 3 parts frames, and all three are different looking?

 

[Doppleganger]

What exactly does it look like again. I looked at my 3 parts frames, and all three are different looking?

This is the opposite side one - they are side specific.

You must be registered for see images attach

Its a mirror image of this one.

You must be registered for see images attach

This is the left side....I have 3 of these because the seller swore it was the right / passenger side.

 

[AyWoSch Motors]

This is the opposite side one - they are side specific.

You must be registered for see images attach

Its a mirror image of this one.

You must be registered for see images attach

This is the left side....I have 3 of these because the seller swore it was the right / passenger side.

Oh okay, passenger side, gotcha. Ill go look tomorrow .