Quadrabog bogs

[iamtherealJayy]

Timing is at 12° btdc, carb adjusted to highest vacuum at 18inhg

xc_hide_links_from_guests_guests_error_hide_media

xc_hide_links_from_guests_guests_error_hide_media

xc_hide_links_from_guests_guests_error_hide_media

Other than a little hiccuping and the slow crank when hot I’ve got the truck running pretty good. I’ve got the drivers front wheel off right now because I could hear a grinding sound(possibly audible in video?)
The slow crank is somewhat intermittent. I can shut the truck off and then it’ll crank real slow a couple rotations then light off and I can instantly shut it off and crank again without issue.

 

[Rusty Nail]

@Snoots

 

[Snoots]

@Snoots

No further comments.

You must be registered for see images attach

 

[iamtherealJayy]

@Rusty Nail @Snoots are these words and emotes of approval or disappointment
Edit: grinding noise was the top of the shield around the brake caliper touches the wheel just barely

 

[iamtherealJayy]

Worked close to home this afternoon(~1mile), decided to drive this truck to work. On the way there the truck didn’t want a lot of throttle and wasn’t happy when it hit second gear and it shifted to third around 30mph (got up to 35 before stop sign) when I went to leave(an hour or so later) first rotation was slow then it fired on second rotation and ran fine back home(got up to 55) I’m going to tinker with it a little bit and check obvious stuff since I’ve only put maybe 4-5 miles on this truck since July. I’m currently on a break and I will be driving the truck back to work.