idahovette
Full Access Member
- Joined
- Aug 7, 2016
- Posts
- 7,270
- Reaction score
- 15,874
- Location
- Weiser Idaho
- First Name
- Perry
- Truck Year
- 1975-1979
- Truck Model
- K20-K10
- Engine Size
- 350
You haven't seen his cousin!!!
q-jet electric choke
- Thread starter spanky55amg
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
spanky55amg
I'll give u $5, a hardy handshake, & 5 fish sticks
- Joined
- Jun 6, 2017
- Posts
- 819
- Reaction score
- 212
- Location
- Dallas, TX
- First Name
- Spanky
- Truck Year
- 1984
- Truck Model
- C10 Short Fleet
- Engine Size
- V8
I think I found the problem.......
You must be registered for see images attach
WHEELMAN
Full Access Member
- Joined
- Aug 9, 2011
- Posts
- 136
- Reaction score
- 11
- Location
- HICKORY TAVERN SC
- First Name
- BILL
- Truck Year
- 1986
- Truck Model
- C10
- Engine Size
- 454 v8
Why would any one use a holly.holly is for racing.edlebrock.a600 or 650.electric choke.stop the insanaty.and the wrenching and go cruising.
Electric chokes.needs a hot.wire that is on when key is on.turn the dial.to the choke.plate is straight up.then.move it.to it leans in just a tad.lock it down.
If you got a cold nature engine.let the plate come over some more lock it down.i used to run mind wide open.in warm weather.
Electric chokes.needs a hot.wire that is on when key is on.turn the dial.to the choke.plate is straight up.then.move it.to it leans in just a tad.lock it down.
If you got a cold nature engine.let the plate come over some more lock it down.i used to run mind wide open.in warm weather.
