POS Stock S-10

[greencountry05]

Here goes...

So, this is my 2003 S-10.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

This is my new heater core.

You must be registered for see images attach

This is what I've got so far.

You must be registered for see images attach

 

[greencountry05]

Here's my toolchest/command center lol.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[greencountry05]

My tools....ALL of them. Starting with the Stanley set

You must be registered for see images attach

New Central Hydraulics 3 ton floor jack...out for it's maiden voyage

You must be registered for see images attach

 

[greencountry05]

First thing's first. Disconnected the battery

You must be registered for see images attach

 

[greencountry05]

Had to remove the hacked up fan shroud to get to the petcock valve. Then, the petcock would not let go so I just took off the lower radiator hose to let it drain.

You must be registered for see images attach

 

[greencountry05]

Radiator is dry and the pan is full o' fluid...but so is the ground, don't tell the EPA

You must be registered for see images attach

 

[greencountry05]

Now to tackle the tedious dash removal.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Stupid cheap old plastic cracked and now I gotta get a new speaker grille from the junkyard...

You must be registered for see images attach

And I stopped once it got dark and could no longer take pics. Still working on getting the dash to pivot down but to no avail. I'm gonna' have to find a real manual because this Chilton's one is totally worthless and inaccurate. I'm flying by the seat of my pants as to which bolts to remove.

 

[greencountry05]

I dropped the column too but it was too dark for a pic.

 

[greencountry05]

Shoulda' taken a picture of my dirty ass hands because BAC will never believe I worked on my own truck and didn't make him do it. Although tomorrow may be a different story lol.

 

[RetroC10Sport]

'ere...

http://www.s10forum.com/forum/f137/heater-core-replacement-procedure-99-s10-340640/#post5001825

 

[greencountry05]

Well, I got the beer part down.

 

[89Suburban]

Friggin kick ass man!!!!

The command center is off da hook, and pet ***** suck my left nut!!!

Keep at it man!

 

[greencountry05]

Almost forgot, I do have a set of Stanley screw drivers and a Stanley brand pair of pliers. Also have Stanley precision screwdrivers too. Just no pics atm...

 

[Old77]

That's a pretty good lookin' little S-10


oh....and nice start to a write up too

 

[greencountry05]

That's a pretty good lookin' little S-10


oh....and nice start to a write up too

It was, at least until I started tearing it apart lol. Oh well it's paid for.