da_raabi
Trailer Park Supervisor
- Joined
- Aug 7, 2013
- Posts
- 1,403
- Reaction score
- 901
- Location
- FloriDUH
- First Name
- Adam
- Truck Year
- 1986
- Truck Model
- c30
- Engine Size
- 454
I've got 2 quadrajet carbs for sale. They are a little different from each other, so I'll try to outline them as best I can below. Price is $100 OBO each plus shipping. PM me if interested. If you want both we can work on price.
First one is the original from my 86 C30 with the 454. It runs good, but the choke linkage is a bit sticky. It could use a tune, but has been fully rebuilt with ethanol-resistant parts, and all the plugs have been epoxied to prevent leaking. I did fatten up the jets, so a 350 might run a bit fat without tuning. I pulled this carb off the truck last week.
This second one is off of an 85 RV 454. I had the motor in my Camaro with this carb until the block cracked... Anyway this one has also been rebuilt with ethanol resistant parts and I'm 99% sure I fattened up the jets on this one too. Ran great the whole time I had it on the car. It's been in the attic for about 2 years. This one is missing the choke heater and fuel inlet fitting, so you will need those.
Again, PM me if interested.
First one is the original from my 86 C30 with the 454. It runs good, but the choke linkage is a bit sticky. It could use a tune, but has been fully rebuilt with ethanol-resistant parts, and all the plugs have been epoxied to prevent leaking. I did fatten up the jets, so a 350 might run a bit fat without tuning. I pulled this carb off the truck last week.
You must be registered for see images attach
You must be registered for see images attach
This second one is off of an 85 RV 454. I had the motor in my Camaro with this carb until the block cracked... Anyway this one has also been rebuilt with ethanol resistant parts and I'm 99% sure I fattened up the jets on this one too. Ran great the whole time I had it on the car. It's been in the attic for about 2 years. This one is missing the choke heater and fuel inlet fitting, so you will need those.
You must be registered for see images attach
Again, PM me if interested.
You must be registered for see images attach