Oxy acetylene vs. Oxy propane who's done both?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,600
Reaction score
9,118
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
My oxy acetylene tanks are empty, I've always used oxy acetylene, but lately it seems everyone is running oxy propane. If I'm going to switch now would be a good time to do it. Advantages? Disadvantages? What all do I need to buy or change? Nearest welding supply place is over an hour from here so I want to be prepared. Don't want to have to make another trip because I didn't get everything the first trip. Thanks
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,869
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I don't think you have to change anything?

When I worked at a local junkyard, we ran propane and I don't recall running anything special. It's also been nearly 20 years since then, so I don't remember how it compared to acetylene, but it was nothing drastic, that's for sure.
 

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,891
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
If you do any gas welding, propane won't work.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,600
Reaction score
9,118
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
If you do any gas welding, propane won't work.

I can live without gas welding. Cutting, heating, and bending would be my use. From all I can gather all I have to do is change to a number 1 propane cutting tip, everything else stays the same from what I"ve read. Does that sound correct?
 

ajd89

Full Access Member
Joined
Nov 30, 2016
Posts
1,537
Reaction score
768
Location
Central Michigan
First Name
andrew
Truck Year
87
Truck Model
k10
Engine Size
350
Are the tank fittings the same?
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
16,027
Reaction score
25,578
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
I don't think you have to change anything?

When I worked at a local junkyard, we ran propane and I don't recall running anything special. It's also been nearly 20 years since then, so I don't remember how it compared to acetylene, but it was nothing drastic, that's for sure.
I believe your right, here at my job we use propane too
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,600
Reaction score
9,118
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
From what I've read you have to change your cutting nozzle, evidently they make cutting nozzles specifically for propane.The fittings are the same. The advantages I've read are it is safer because acetylene has a wider combustion ratio as in like 2to1 will the way to 20 to 1 air fuel propane is like 4 to 1 thru 8 to 1. And those aren't the right numbers I don't remember the correct numbers. It's convienent if you run out of propane at 9pm Sat .night you can run to quik trip and pick up a tank. And suppose to be way cheaper. These only things that I've read, I have not confirmed anything. That's why I started this thread. I never gas weld anymore which some say you can, some say you can't with propane.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,869
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
We ran it at the junkyard for the cheaper cost. Never did any gas welding there either, just cutting. Lots and lots of cutting.
 

Skidmark97

Junior Member
Joined
Aug 31, 2020
Posts
24
Reaction score
74
Location
Midwest
First Name
Dave
Truck Year
1984
Truck Model
K10
Engine Size
350
I have used acetylene,propane,propalene and the good thing about propane is you can go to any gas station and get a refill in a pinch, the other good thing a tank lasts longer of comparable size and you can use the same guages as you were using for acetylene, You will need a propane specific tip if your cutting with it and they are probably 20 dollars at a welding supply , I cut a lot of large steel so up to 6 inch thick on bridges and it cuts fine but is harder to light in windy conditions, depending on what size tip you run ,if your steel is under 1 inch thick you can probably use a number 2 tip and pressure would probably be fine with around 10 psi propane and 40 to 50 oxygen , each tip has a recommended pressure to use but I would say that would work, I hope you get it figured out and good luck
 

boogieman

Junior Member
Joined
Mar 6, 2019
Posts
6
Reaction score
5
Location
indiana
First Name
john
Truck Year
1987
Truck Model
Blazer
Engine Size
350
The other thing that should be noted is that you should use hoses that are T rated. R rated hoses should only be used for acetylene. The oils in propane will eventually rot the R rated hosed from the inside out. There should be markings on the side of your hose about what you have.
 

tucker

Junior Member
Joined
Dec 9, 2020
Posts
3
Reaction score
1
Location
or
First Name
tucker
Truck Year
1982
Truck Model
k20
Engine Size
6.2
i have run prop for years.the cuts with prop is not as clean but its cheaper.but never use a prop tip with acetylene it will burn the inside of the two piece prop tip.
 

Latest posts

Forum statistics

Threads
44,416
Posts
957,115
Members
36,752
Latest member
78 squarebody
Top