NV4500 Swap - Clutch/Hydraulics Dilemma

[mrgoodwrench]

The master itself is indeed. The throw out is from the 05 nv4500 and has a similar fitting on it.
I seen the master on the 05 has that same roll pin line lock. Gotta be something out there to adapt to it, I’d think.

Id try the line for a late model chev 2500 pickup. Maybe something like this


Try searching the clutch line for a 1997 silverado k2500 just a guess but that looks like your master and the other end should fit the quick connector on a late model slave cylinder

https://www.partsgeek.com/catalog/1...utch/clutch_master_cylinder.html#immersedview

Sent from my SM-G970U using Tapatalk

 

[Preston Tucker]

How would one adapt to this style.

You must be registered for see images attach

Do you have a link where i could get ths? i notice it has no N safety switch which is a big win.

 

[eskimomann209]

Do you have a link where i could get ths? i notice it has no N safety switch which is a big win.

You putting it in a square?

 

[Preston Tucker]

You putting it in a square?

Yes i plan to, im running the internal slave bellhousing off the 2000 gmc and i want it to have enough fluid capicity

 

[eskimomann209]

Yes i plan to, im running the internal slave bellhousing off the 2000 gmc and i want it to have enough fluid capicity

Cool. Sorry slow response been bouncing around. The master I posted is for an OBS 88-95ish ones.

 

[Preston Tucker]

Cool. Sorry slow response been bouncing around. The master I posted is for an OBS 88-95ish ones.

and its abe to move enough fluid to correctly operate the 96 and up internal slaves?

 

[eskimomann209]

and its abe to move enough fluid to correctly operate the 96 and up internal slaves?

Oh ya.
Pretty common swap back and forth between the two styles. Internal and external slaves.