dvdswan
Full Access Member
- Joined
- Mar 11, 2014
- Posts
- 2,366
- Reaction score
- 2,036
- Location
- Port Orchard, WA
- First Name
- Dave
- Truck Year
- 1978
- Truck Model
- K10
- Engine Size
- 350
Welcome to the site.
New here. Not to building or wrenching.
- Thread starter Jeramie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Connor koehler
Junior Member
- Joined
- Dec 4, 2020
- Posts
- 26
- Reaction score
- 38
- Location
- Spokane wa
- First Name
- Connor
- Truck Year
- 1980
- Truck Model
- K20 suburban
- Engine Size
- 454
Hello from Washington stateJeramie
Member
- Joined
- Dec 5, 2020
- Posts
- 31
- Reaction score
- 20
- Location
- Watson Oklahoma
- First Name
- Jeramie
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
Looks like I will be needing some rust repair panels. Inner rocker on driver side is rotted by the seat and there is some rust in the seams around the driver kick panel. All the supports look good and only the passenger side floorpan has any rot. It's pretty thin in a couple spots. For this winter I'm going to POR 15 the floor and just deal with it being loud and not as warm as it should be. Vice wasting money on sound deadening and carpet to take all back out in 4 months. Lol.
Jeramie
Member
- Joined
- Dec 5, 2020
- Posts
- 31
- Reaction score
- 20
- Location
- Watson Oklahoma
- First Name
- Jeramie
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
Cut out the rust on the cowl yesterday evening. Will cut a patch panel out of the old cab and weld it in when I get another dry day that I get off work before dark. Or Saturday.
You must be registered for see images attach
You must be registered for see images attach
Jeramie
Member
- Joined
- Dec 5, 2020
- Posts
- 31
- Reaction score
- 20
- Location
- Watson Oklahoma
- First Name
- Jeramie
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
This was caused by failed seam sealer. Leaking into the heater box and onto the passenger floor pan. Rotting it to the point where it too needs replaced.
You must be registered for see images attach
Jeramie
Member
- Joined
- Dec 5, 2020
- Posts
- 31
- Reaction score
- 20
- Location
- Watson Oklahoma
- First Name
- Jeramie
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
Someone in the past used blue RTV to seal it then painted it over. Pressure washer reveales all.
82sbshortbed
Fuckemall!!
- Joined
- Mar 1, 2018
- Posts
- 15,828
- Reaction score
- 53,162
- Location
- SE Texas
- First Name
- Doug
- Truck Year
- 1982, 1984
- Truck Model
- 1500 shortbed, 1500 longbed
- Engine Size
- 454, 305
Welcome from Texas nice looking project
86 SCOTTSDALE
Full Access Member
- Joined
- Apr 10, 2019
- Posts
- 360
- Reaction score
- 281
- Location
- Oakham MA
- First Name
- Armand
- Truck Year
- 1986
- Truck Model
- K10
- Engine Size
- 305
Welcome from Mass. Great project, I had same issue with fire wall resulting in work on floor and rockers but all is well now. Good luck.
- Joined
- Mar 27, 2017
- Posts
- 837
- Reaction score
- 708
- Location
- Edmonton Alberta Canada
- First Name
- Kurt
- Truck Year
- 79/86
- Truck Model
- C30
- Engine Size
- 350, TH400.4:10 gears 2WD
Welcome Edmonton Alberta Canada
Jeramie
Member
- Joined
- Dec 5, 2020
- Posts
- 31
- Reaction score
- 20
- Location
- Watson Oklahoma
- First Name
- Jeramie
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
Got new radiator, headlight switch, wiper motor, and ignition switch today. Hopefully I can start working on installing the new painless performance harness tomorrow after work.
